Nortel Networks 1140E manual Configuring options

Page 20

Configuring options

c.If the search is successful, a list of Bluetooth devices appears in the Found: combo box.

Note: If the search is not successful, the message "Search completed. No device found" is displayed. If this happens, power off the Bluetooth headset, and repeat steps 5 and 6.

7.When your headset appears in the Found: combo box, press the Stop soft key or wait for the search to finish.

8.Choose one of the following:

•If your headset is displayed in the Found: combo box, proceed to step 9.

•If your headset is not displayed in the Found: combo box, select your headset from the list, as follows:

a.Press the Right navigation key to navigate to the Found: combo box. Press the Enter key to start the edit mode.

b.Press the Down navigation key to open the list. Press the Up/ Down navigation keys to scroll and highlight your headset.

c.Press the Enter key to select the headset and close the list. Press the Enter key to exit edit mode.

9.Press the Right navigation key to scroll in the list and highlight the Pair button (next to the Pair Device item) and press the Enter key.

a.A dialog box appears that prompts you to "Enter PIN#". Use the telephone dialpad to enter the PIN for your Bluetooth headset; check your headset's documentation to find its PIN (sometimes called a passkey). Typically this value is 0000.

b.Enter the Bluetooth headset PIN and press the Enter key.

10.Choose one of the following:

•If the headset is successfully paired with your phone, proceed to step 11. To verify that the pairing was successful, ensure that the headset appears in the list next to the Paired: item. If pairing is successful, the message "Pair completed" is also displayed at the bottom of the screen.

•If the headset is not successfully paired with your phone, an error message is displayed at the bottom of the screen. If you get an error message:

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents IP Phone 1140E Page Revision history Revision history Contents Accessing External Server Applications Making a callBasic features About the Nortel IP Phone 1140EOn page 9 shows the IP Phone 1140E Telephone controls IP Phone 1140EAbout the Nortel IP Phone 1140E Use the Navigation keys to scroll through About the Nortel IP Phone 1140E About the Nortel IP Phone 1140E Telephone display IP Phone 1140E LCD screenEntering text using the telephone dialpad Entering text using the USB keyboardEntering and editing text Application text entryUSB keyboard function keys during telephone calls Function key Action Configuring options PreferencesLanguage To pair the Bluetooth Headset with your phone Configuring options Dual Pairing Headsets Interaction between Bluetooth headset and wired headset To unpair a Bluetooth Headset When you do not want to use BluetoothTo switch between a wired headset and Bluetooth Local Diagnostics IP Set&DHCP InformationNetwork Configuration Lock MenuTelephone setup Language choiceRing type Call logTime offset About your programmable buttonsExternal autodial Making external calls using line soft keys Making external calls using intercom soft keysMaking internal calls using intercom soft keys Making a callAnswering a call Using handsfree Using a headsetWhile on an active call Placing a call on holdMuting the microphone Accessing External Server Applications Accessing External Server Applications Page IP Phone 1140E
Related manuals
Manual 178 pages 52.68 Kb
Top Page Image Contents