About the Business Series Terminal Doorphone
The Business Series Terminal (BST) Doorphone is used as an intercom to control access to your building. Pressing the Call button on the BST Door- phone calls one or more telephones, and/or sends a distinctive chime to tele- phones in an assigned page zone.
Placing an internal call from any telephone on the system to the BST Door- phone sets up a
Additionally, a Door Opening Controller can be installed to permit the activa- tion of locks on doors or gates. Contact your system administrator for more information.
To answer the BST Doorphone
When the Call button on the BST Doorphone is pressed, one or more tele- phones will ring and the name of the BST Doorphone will appear on the tele- phone display.
If more than one BST Doorphone is installed on your system, each one can be programmed to call any telephone.
The chime
If the BST Doorphone call is not answered within the programmed number of rings, you will hear a page tone followed by a distinctive chime.
Note: The BST Doorphone can also be programmed to send the chime without ringing.
If more than one BST Doorphone is installed on your system, each BST Doorphone can send a unique chime.
To respond
A BST Doorphone call can be answered like any internal call ringing at your display telephone. Simply pick up the handset or press the handsfree button.
To respond to the BST Doorphone chime or initiate communication at any time, place an internal call to the appropriate BST Doorphone. Press the intercom button and dial the BST Doorphone’s extension number or press an internal autodial button assigned to the BST Doorphone.
Note: For more information on programming internal autodial buttons, refer to your Telephone User Card.
3