Nortel Networks 7100 Hot desking activating To activate hot desking, Cancelling, Feature *510

IP telephone features for 20XX telephones

Hot desking - activating

To activate hot desking:

On the telephone to which you are diverting your calls (yyy).

1.Enter Hot desking:

2.Press Divert.

3.At the DN prompt, enter the DN of your telephone (xxx).

4. Press OK. The display reads Enter < > PW.

5.Enter the password for your telephone (xxx).

6.Press OK.

Hot desking - De-activating hot desking
cancelling	Hot desking can be cancelled from either IP telephone:
	Ensure that the telephone is on-hook before cancelling hot desking. There
	may be up to a 10-second delay after the call ends before the system will
	allow you to cancel hot desking. This period can vary, depending on the call
	type.

On the active telephone (yyy):

1.Enter the Hot desking feature. The display reads: Cancel hot desking?

2.Press Yes to cancel hot desking. The telephone displays of both sets return to normal.

To cancel hot desking on the diverted telephone (xxx), press CANCEL.

Automatic cancellation occurs if the UTPS service from the system is terminated or if either telephone re-boots, or is unplugged, or is hot-desked by a third telephone.

Hot desking - If you forget your hot desking password, ask your system administrator to

reset reset the password for your telephone. This will allow you to access hot

password desking on your telephone and enter a new password.

Time zone - Use this feature to reset the time on an IP telephone that is located in a

adjust different time zone from the Business Communications Manager to which it is registered.

FEATURE *510.

Page 16