Nortel Networks 7100, 7000 manual Feature *82

Telephone features

To send Hookswitch or DTMF during a conference call

Either system telephone engaged in a three-way conference call over a Network CLID or DS trunk can issue a hookswitch or DTMF dialing request without leaving the conference, if the feature is enabled.

Note: This feature is not available for i20xx telephones or Symbol NetVision handsets.

–To hear DTMF tones on both telephones during dial, activate Long Tones (FEATURE 808).

–To conference in someone through the trunk, use Link (FEATURE 71)

Contrast	FEATURE *7 plus a number from 1 to 9 to adjust the display contrast.
adjustment	Press HOLD to set your choice.
Dialing modes	FEATURE *82
	Choose one of three methods of dialing.
	1.	Press FEATURE *82.
	2.	Press # to select the mode.
	3.	Press HOLD to store the mode.
	Standard Dial: Select a line, then dial the number. (Standard Dial is
	always available, even when another dialing mode is selected.)
	Automatic Dial: Dial the number without choosing a line button first. Your
	prime line is automatically selected for the call.
	Pre-Dial:Dial the number, then press a line button to place the call. Edit
	the number by pressing the volume bar before placing the call.
Do Not Disturb	FEATURE 85		Cancel: FEATURE #85

When you are not on a call prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call.

Group Listening

FEATURE 802Cancel: FEATURE #802

Use both the handset and speaker while you are on a call. To avoid elec- tronic feedback, keep the handset away from the speaker during the call, and press RLS to hang up. Note: Most of the portable handsets do not have speakers, so cannot use this feature.

Page 6