Grandstream Networks GXV-3000 Making and Answering Phone Calls, Multiple SIP Accounts and Lines

GXV-3000 User Manual		Grandstream Networks, Inc.
		Enable/Disable hands-free speaker mode
	SPEAKER
	HOLD	Temporarily hold an ACTIVE call
	SEND	Dial a new number or Redial the last number dialed. After entering
		the phone number, pressing this key would force a call to go out
		immediately before “no key entry timeout” value expires
	0 - 9, *, #	12 standard Digit, * and # keys are usually used to make phone
		calls

4.3 Making and Answering Phone Calls

4.3.1 Handset, Speakerphone and Headset Mode

Handset can be switched between either Speaker or Headset. However, whenever the Headset is plugged in, Speaker will be switched to Headset.

To Switch between Handset and Speaker/Headset, simply press the Hook Flash in the Handset cradle or press the SPEAKER button in the phone.

4.3.2 Multiple SIP Accounts and Lines

GXV-3000 can support up to 3 independent SIP accounts. Each account is capable of independent SIP server, user and NAT settings among others. Each of the 3 LINE buttons (LINE1-LINE3) is “virtually” mapped to each SIP account. In off hook state, when user chooses an idle line, the name of the account (as configured in the web interface) will be displayed in the LCD while a dial tone is being played out. For example, if the 3 SIP accounts are named FWD (FreeWorldDialup), BroadVoice and Asterisk PBX respectively and they are all active and registered. When LINE1 is pressed, user will hear dial tone and see “FWD”. When LINE2 is pressed, user will hear dial tone and see “BroadVoice”. When LINE3 is pressed, user will hear dial tone and see “Asterisk PBX”.

For outgoing calls, GXV-3000 will pick up the LINE pressed, which the LED will be lit up in solid red color. User can switch the dialing account before dialing any digits by pressing the same LINE button one or more times. If user continues to press one LINE, the selected account will circulate among the registered accounts. For example, when LINE1 is pressed, LCD displays “FWD”. If LINE1 is pressed twice, LCD displays “BroadVoice” and the subsequent call will be made through SIP account 2.

- 15 -