Using the Memory Dialing Feature | Cobra Electronics AN - 8630

Cobra®

USING THE MEMORY

DIALING FEATURE

Memory dialing lets you store and dial 10 commonly-called telephone numbers automatically. No more fumbling with the phone book, guessing at numbers or accidentally misdialing the people you call most.

To Store A

Number In Memory

11. With the handset turned off (TALK

TALK

BUTTON button off), press and release the MEMORY button.

2.Dial the phone number you wish to store, including area code if different from your own, up to 16 digits long.

3.Press and release the MEMORY

2button again.

MEMORYBUTTON 4. Press any keypad button between 1 and 0, which will assign the phone number to that memory location. You will hear 2 double beeps, which means that the number was properly stored. If you hear nothing, press and release MEMORY and repeat the steps again. Follow these same steps for every number you wish to store, assigning each to a keypad number, 1 through 0.

Creating A Directory

3As you are programming the memory DIRECTORY bank, you will want to keep track of

whose number you are assigning to each location. When finished, you may indicate who is assigned to each number by filling in the directory adhesive label included. This provides a quick and easy reference. You may place this directory in any convenient location on handset or base.

To Store A Number

Longer Than 16 Digits

For telephone banking or alternate long distance service, you may need to program a number that is longer than 16 digits. To do so, you will need to divide the number between two different memory locations. Example: Store an alternate long distance access number in location 1 and your personal indentification number for that service in location 2. Please call your Cobra Consultant at 1-773-889-3087 for additional guidance.

To Dial A Number Stored

In Memory

1. Press TALK to get a dial tone.

TALK

BUTTON

		2. Press MEMORY.
	2	3. Press the keypad button (1-0) that you
	MEMORY	3. Press the keypad button (1-0) that you
	MEMORY	assigned to the number you wish to call,
	BUTTON	assigned to the number you wish to call,
		and your Cobra Intenna will dial the
		number automatically.
		NOTE: For numbers longer than 16
	2	digits, stored separtely, follow steps
	2	1, 2, and 3 above, then press MEMORY
	MEMORYBUTTON	and keypad for second number.

To Replace Or Change A

Number Stored In Memory

Simply repeat the steps under “To Store A Number In Memory”, found on the facing page. The new number will automatically replace the previous number stored.

NOTE: Numbers stored in memory may be lost when you disconnect from AC power, if the 9V battery runs down completely or is not installed. Follow the steps under “To Store A Number In Memory” if you need to program the numbers again.

USING THE BUILT-IN

INTERCOM/PAGING SYSTEM

Call Dad to dinner, monitor the baby while you do laundry or keep an ear out to make sure that the children aren’t hurt. These options, along with many others, are at your fingertips with your Cobra Intenna because it doubles as a two-way intercom/paging system between the base and the handset—and outside calls will still come through! If you should misplace the handset, simply activate the pager and follow the signal until you locate it.

See next page for details.

AN8630-25

NEED HELP? 1-773-889-3087