TROUBLESHOOTING TIPS
Doesn't answer or messages are incomplete
•Make sure answerer is on.
•Memory is full; erase some messages.
•Caller left a message longer than the time limit allowed.
Incoming calls are answered on the 10th ring
• Memory is full; erase some messages.
Unit won't respond to remote commands
•Make sure you are using a
•Make sure you entered the correct security/ user code.
•Did the unit hang up? Remember you only have a
Answerer doesn't respond
•Check AC power cord and phone line connections.
•Make sure an extension phone is not in use.
•Make sure you didn't press the PLAY/PAUSE/ MEMO button by mistake.
Can't hear messages
• Adjust volume control on the side of the unit.
LOW BATTERY indicator appears
• Install a new 9V battery.
Can't restart message
•You must play messages for at least 5 seconds before pressing the REVIEW button.
Message light flashes rapidly
•Memory is full; erase some messages.
•Check both the CID and voice banks for messages.
"Unknown" shows in the display
•Call originates from a blocked number, such as telemarketer.
•Call is through a long distance carrier that does not support Caller ID
•Call is from overseas.
20