BATTERY LOW INDICATOR
When a battery has not been installed or needs to be replaced, the BATT. LOW indicator flashes rapidly.
ANSWERING MACHINE SETUP
This section shows you how to set up your answering machine to receive incoming calls. Before you begin the setup, you must be sure the answerer is on.
TURNING ON THE ANSWERING MACHINE
Press and hold the ANS.ON button to turn the answering machine on and off (the unit beeps twice and a voice prompts "functions on" or "functions off").
NOTE: The unit takes approximately 10 seconds to emit the voice prompts "functions on" or "functions off."
When the answerer is on, the MESSAGES/ ANSWER ON indicator lights. When the day and time need to be set or the outgoing announcement needs to be recorded, the MESSAGES/ANSWER ON indicator light flashes rapidly.
SETTING THE VOICE TIME/DAY
•Press and hold the DAY button to set the day of the week.
•Press the HOUR button to set the hour (a.m. or p.m.).
•Press the MINUTE button to set the minute. When you hold the MINUTE button, it advances the time in
•Press and quickly release the DAY button to review the day/time setting.
MESSAGES/ANSWER ON indicator light
HOUR | MINUTE |
|
WAKE
ANS. ON button
BATT. LOW indicator
VOLUME
TUNING
MINUTE button
HOUR button
DAY button
7