GE 2-9827 manual Leaving a Memo, Call SCREENING/AUTO Disconnect, Memory Full

TOTAL MESSAGE ERASE

You can erase all the messages from memory by pressing and holding the ERASE button when the unit is not playing messages (the unit beeps to confirm the messages are erased). Note that total message erase cannot be completed if there are any unplayed messages.

NOTE: If you hear several high-pitched beeps, your answerer has not erased the messages because some of them or all of them have not been played.

You can restore messages erased this way by pressing the PLAY•STOP button— but only if you haven‘t activated any other answerer functions or received new messages after erasing the messages.

LEAVING A MEMO

Leaving a memo is just like recording an outgoing announcement, except you use the MEMO button instead of the ANNOUNCEMENT button.

1.Press and hold MEMO.

2.When you hear a beep, continue holding MEMO and leave your message.

3.Release MEMO when you finish your message.

The memo is included in the message count represented by the number of times the MESSAGES/ANSWER ON indicator light flashes.

CALL SCREENING/AUTO DISCONNECT

Because the answerer automatically stops recording when any extension phone is picked up (Auto Disconnect feature), you can screen incoming calls. Listen as the caller leaves a message and pick up the handset (or any extension phone) if you want to talk to that caller.

MEMORY FULL

When the memory is full, you must erase old messages so that there is room in the memory for new messages.

If the memory is full, the unit answers on the 10th ring and the MESSAGES/ ANSWER ON light flashes rapidly. When using the remote access feature, you can enter your security code and then access your messages.

NOTE: The unit answers on the 10th ring when it is turned off or the memory is full. To access the answerer, enter the 3-digit security code after the beep. If memory is full, play messages and erase some of them to restore memory. If the answerer is off, press 6 to turn it on.

14