Wall Mount Installation, Direction of the base plate

WALL MOUNT INSTALLATION

1. Rotate the handset hook one-half	1
turn.	Handset hook
	Handset hook

2.Remove the base plate from the back by pressing down on the snap tabs and then reverse the

direction of the base plate.	2

3.Plug one end of the telephone line cord into the jack marked PHONE LINE on the back of the

	unit. Wrap the excess cord
	around the plastic tabs. Plug the
	other end of the telephone line
	cord into a modular wall jack.	3
	Replace the base plate by putting	3
	Replace the base plate by putting
	the tabs into the slots and
	snapping them into place.

4. Connect the power supply adapter to the POWER 9V DC jack on the back of the unit and plug it into an AC outlet.

5. Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)

			12 MEMORY
		1	6
6. Plug the handset cord into the	6	2	7
		3	8
		A	B	C
		4	9
		5
handset and into the unit and			EMERGENCY QUICK DIAL
handset and into the unit and		SAVE		MEMO
then hang up the handset.		A	B	C

7.Set the TONE/PULSE switch to TONE you if have touch-tone service or to PULSE if you have rotary dial service.

1 2 3

4 5 6

7 8 9

* 0 #