GE 343A6610-0001, 2-9824 warranty Desktop System Installation

Page 3

DESKTOP SYSTEM INSTALLATION

3	1

2

1.Connect the handset cord into the handset and into the jack on the left side of the base unit.

2.Plug one end of the telephone line cord into the jack marked PHONE LINE on the back of the unit and plug the other end into a modular wall jack.

3.Plug the smaller end of the power supply cord into the POWER jack on the back of the answerer; plug the larger end into an AC power outlet.

4.Set the TONE/PULSE switch (on the right side of the unit) to TONE if you have touch-tone service or to PULSE if you have rotary dial service.

NOTE: Only use the Thomson power supply that came with this unit (5-2378). Using other adapters may damage the unit.

3

Image 3

Contents Introduction Table of ContentsBefore YOU Begin Getting StartedDesktop System Installation Direction of the base plate Wall Mount InstallationOutgoing Announcement OGA Answering System SET UPSaving Messages Answerer OperationTurning the Answerer on and OFF Message PlaybackMessages Indicator Light Call SCREENING/AUTO DisconnectMemo Button Leaving a Memo Security Code Remote AccessToll Saver Feature Accessing Your Answering MachineActivating Instant Replay from a Remote Location Telephone Operation RedialFlash Button Storing a Number in Memory Memory DialingDialing a Stored Number Chain Dialing Fifth ring Troubleshooting GuideService Care and MaintenanceIndex For how long after your purchase Limited Warranty