GE 29861 manual Setting the Time, To Set the Hour, To Set the Minutes, To Set the Day

Setting the Time

For each message received, a time/day stamp is added at the end of the message.

To Set the Hour

1.Press and release NEXT or PREVIOUS until the unit announces and displays the correct hour.

2.Once the hour is set, press SET to enter the minutes menu.

To Set the Minutes

1.Press and release NEXT or PREVIOUS until the unit announces and displays the correct minutes.

2.Once the minutes are set, press SET to enter the day menu.

Range of Settings

Time
Hour	12 a.m. - 11 p.m.
Minute	0 - 59
Day	Sunday - Saturday
Rings	2, 3, 4, 5, 6, 7, 8,
to Answer	toll saver
Message	1, 2, 3, 4 minutes
Length
Security	0, 0 - 9, 0 - 9, 0 - 9
Code

To Set the Day

1.Press and release NEXT or PREVIOUS until the unit announces and displays the correct day.

2.Once the day is set, press SET. The unit announces the time/day, then enters the rings to answer menu.

NOTE: The days of the week show in the display as numbers. For example, “Sunday” shows as 0.

Setting the Rings to Answer

This feature is used to set the unit to answer a call after a specific number of rings.

The unit announces the rings to answer. To change, press NEXT or PREVIOUS. To set and go on to the next item, press SET.

1.Press and release NEXT or PREVIOUS until the unit announces and displays the correct number of rings for the answerer to pick up.

2.Once the rings to answer is set, press SET. The unit announces the rings to answer, then enters the incoming message length menu.

11