NEC N 1093092 manual Central Office Calls, Placing, Conference, Directed Call Pickup

Feature Operation

Central Office Calls, Placing

Central Office Calls, Placing is enabled by default.

To place an outside call using a line or loop key:

-Press the line or loop key. (You may have to enter 0-9 for a Line Group number after pressing the loop key).

To place an outside call over a specific line using Line Dial-Up:

1.Press TALK.

2.Dial #9.

3.Dial the line number (e.g., 01 for line 1).

To place an outside call using Direct Line Access:

1.Press TALK.

2.Dial 1.

3.Dial the line number (e.g., 01 for line 1).

To place an outside call using Line Group Access:

1.Press TALK and dial a Line Group Access Code (90-98).

-If you hear dial tone as soon as you dial 9, your system has Line Group Routing. A line group has been automatically selected for you.

Conference

Conference is enabled by default.

To set up a Conference:

1.Establish Intercom or outside call.

2.Press CONF.

3.Dial extension you want to add,

OR

Place or answer an outside call,

OR

Retrieve call from Park Orbit.

4.Press CONF to set up the Conference.

-You see: CONFERENCE CALL

Directed Call Pickup

Directed Call Pickup is enabled by default.

To use Directed Call Pickup to intercept a call to a co-worker’s extension:

1.Press TALK.

2.Dial **.

3.Dial your co-worker’s extension number.

-To pick up a call ringing an attendant, dial the attendant’s extension number (e.g., 300). Do not dial 0 or 01-04.

24 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User Guide