NEC P, N 1093092 manual Distinctive Ringing, Do Not Disturb Override, Extension Hunting

Feature Operation

Distinctive Ringing

Distinctive Ringing is enabled by default.

To change your handset’s ringing tone:

-Outside calls ring with two short rings followed by one long.

-Intercom calls ring with one long ring.

1.While idle, press RING/VOL.

-You hear the selected ringing tone. The tone will ring for about 2 seconds unless you press RING/ VOL to select another tone.

-There are four ring tones from which to choose. The default setting is hi-lited.

Display Name	Description
Ring Type A High	High pitch ring, loud
Ring Type A Low	High pitch ring, soft
Ring Type B High	Low pitch ring, loud
Ring Type B Low	Low pitch ring, soft
Ring Type C High	High pitch warble, loud
Ring Type C Low	High pitch warble, soft
Ring Off	Vibrate1

1 While the handset is in the charger, the Ring Off setting uses Ring Type A Low.

To turn the ringer off:

1.While your phone is idle, press and hold ON/OFF MUTE for five seconds.

-The OFF icon will display indicating that the ringer is off.

Do Not Disturb Override

Do Not Disturb Override is disabled by default.

To use Do Not Disturb Override:

1.Dial your co-worker.

2.When you hear DND tone, dial 1.

3.The system automatically places a ringing Intercom call to your co-worker.

Extension Hunting

Extension Hunting is disabled by default.

To temporarily install or remove your extension from your UCD group:

1.Press TALK.

2.Dial *5, then,

3.Do one of the following:

-Dial 4 to return your extension to your group.

-Dial 6 to remove your extension from your group.

2

DSX Cordless Lite II Telephone User Guide Chapter 2: Features ◆ 25