NuTone VSA4S installation instructions Installation, Contents of Carton

Page 5

VSM4RK & VSM4SK VIDEO DOOR ANSWERING REPRESENTATIVE WIRING ILLUSTRATION

INSTALLATION

CONTENTS OF CARTON

Check (_) for following VSA4S carton contents:

VSA4S Handset with mounting bracket

Hardware bag assembly containing:

Electrical junction box cover and power cable assy.

(2) #6 x 1 1/4" screws

(2) #6 x 3/4" machine screws

Installation Instructions

Note to Installer: Do not discard these installation instructions. Please give all installation instructions, warranty registration and homeowner’s manual to homeowner.

PRECAUTIONS AND GUIDELINES

The NuTone VSA4S handset has been designed to work with NuTone models VSM4RK or VSM4SK. Please read and follow ALL installation instructions, guidelines and precautions. Any deviation from these instructions or miswiring combinations will cause the unit to fail and all NuTone warranties will be void. Following are the instal- lation instructions for the VSA4S Handset. Please refer to the installation instructions and homeowners manual packed with the VSM4RK or VSM4SK when installation and operating these models.

WARNING: 120 Volt AC power to the VSM4RK, or VSM4SK must remain off until all system wiring is complete.

Observe all local regulations and codes in your area.

All screw terminals at the handset and VSM4RK, or VSM4SK must be secure.

Observe all color codes of wires when connecting handset to VSM4RK, or VSM4SK.

The VSA4S is designed to be used with category 5, or category 6 cable (purchased separately). The use of cable other than category 5, or category 6 cable will void all NuTone warranties and may result in faulty installation and improper opera- tion.

The door camera must not be mounted in an area that would be subject to direct sunlight or a strong reflection from the sun.

Wiring Specifications

The VSA4S is designed to connect to the VSM4RK, or VSM4SK video door answering system using category 5 or category 6 cable.

• Maximum cable length: 250 ft

IMPORTANT: NuTone cannot be responsible for improper system operation that results from interfer- ence generated by light dimmers, fluorescent lighting fixtures, and similar electrical products. Such interfer- ence must be corrected at the source.

TO HELP REDUCE THIS INTERFERENCE, ALL WIRING CONNECTED TO THE HANDSET MUST BE PLACED AT LEAST 12 INCHES FROM ANY A.C. POWER WIRING. AVOID RUNNING HANDSET WIRES PARAL- LEL TO A.C. POWER WIRING.

5

Image 5
Contents Surface Mount Handset Model VSA4S Precautions Explanation of Graphical SymbolsImportant Safety Instructions Risk of Electric Shock Do not OpenImportant Safety Instructions NEC-NATIONAL Electrical Code Example of Antenna Grounding AS PER National Electrical CodeContents of Carton InstallationOperational Checkout Frame Construction New ConstructionExisting Construction FCC Information Part 15 Rules Garantie Directives D’INSTALLATIONCompatible avec les modèles VSM4RK et VSM4SK de NuTone Risque DE Choc Électrique NE PAS Ouvrir Signification DES Symboles GraphiquesPrécautions Importantes Consignes DE Sécurité17. Pénétration DE Corps Étranger OU DE Liquide Importantes Directives DE SécuritéCode Électrique National NEC Spécifications de câblage Contentu DE LA BoîtePrécautions ET Lignes Directrices Vérification du fonctionnement Construction du cadre nouveau bâtimentBâtiment existant Règlement de la FCC, Partie