Bang & Olufsen 2500 manual Store AN Operator Code for ALL Calls

OPERATOR CODE

An operator code is used when you want to make a call via an alternative tele- phone operator. When calling a phone number, BeoCom 2500 inserts this code automatically when it is once stored in the telephone.

The alternative operator may be chosen under certain conditions:

•Unconditional. Choose the alternative operator for all calls.

•Choose the alternative operator for calls with numbers starting with the same group of digits.

•Choose the alternative operator for calls to all other numbers than those starting with a dedicated group of digits.

STORE AN OPERATOR CODE FOR ALL CALLS

Press	Menu, X	MENU *
		< SETUP MENU >
Press	Enter
		SETUP MENU
		< PRESET VOLUME>
Press	> until OPERATOR CODE is shown in the display
Press	Enter	OPERATOR CODE:
		_
Enter	the operator code (e.g. 1 0 1 0)
Press	Enter	STORED
		OPERATOR CODE