Belkin KX-TCA256 operating instructions Please replace with Panasonic battery only

Page 50

Important Information

Please replace with Panasonic battery only.

• Please order part number N4HHGMB00007 or HHR-P103.

If you replace the battery before the low battery warning appears, the battery strength icon may display an incorrect reading. In this case, use the PS as normal with the new battery installed. When the low battery warning is displayed, charge the battery for more than 5.5 hours. The battery strength icon will then display a correct reading.

Caution

To reduce the risk of fire or injury to persons, read and follow these instructions.

1)Use only the battery specified.

2)Do not use non-rechargeable batteries.

3)Do not dispose of batteries in a fire. They may explode. Check with local waste management codes for special disposal instructions.

4)Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

5)Exercise care in handling the battery in order not to short the battery with conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns.

6)Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Important Notice Concerning the Correct Use and Charging of Ni-MH Batteries

Batteries, due to their construction, undergo some wear and tear. The lifetime of a battery also depends on correct maintenance. Charging and discharging are the most important factors. You should take notice of the following to maintain the life of the battery as long as possible.

Ni-MH batteries have a kind of memory, the “memory effect.” If fully charged batteries are used several times only for 15 minutes in the handset and then recharged, the capacity of the batteries will be reduced to 15 minutes due to the memory effect. Therefore you

should discharge the batteries completely, i.e. use them in the handset until “ ” on the display starts flashing. Then recharge them as described in the manual. After the memory effect has occurred, it is possible to achieve almost complete capacity of the Ni-MH batteries by charging and discharging several times one after another.

Ni-MH batteries can also self-discharge. This self-discharge depends on the ambient temperature. At temperatures under 0 °C, the self-discharge will be the lowest. High humidity and high temperatures support the self-discharge. Also long-term storage will lead to self-discharge. A dead Ni-MH battery should not be disposed of normally. They contain toxic heavy metal hydride and therefore should be recycled.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Operating Instructions Table of Contents Troubleshooting Before Initial Use Accessories j-included/ i-optionalCharger Belt Clip Battery Cover Before Operating the PS Location of ControlsConnection JoystickThan 5.5 hours before initial use Battery InstallationBattery Charge Power On/Off Display Icons99998822 103 Operation OutlineSub menu while in off-hook/during a conversation Main menu while in standby modeFunction Menu Display Message PBX Feature MenuPause Search WaveFlexible Key Display Understanding the Icons for the F-CO keySoft Key Display Ringer Volume Adjustment Receiver/Speaker Volume AdjustmentUnlocked Locked Key LockSelecting the Display Language Making Calls Using the line access numbersUsing Flexible CO keys Calling Another ExtensionHot Key Dial Using the Call LogUsing the Outgoing Call Log Soft key Using the Incoming Call LogUsing the Incoming Call Log Group Group noUsing the PBX System Phonebook Using the PhonebookUsing the Handset Phonebook Using the PBX Extension PhonebookIndex Search Intercom Calls/Outside Calls/Group Calls Temporary Ringer Volume AdjustmentReceiving Calls Enter a name, phone Caller IDRight soft key Group number Joystick Holding During a ConversationTransferring a Call To hold Exclusive Call Hold To retrieve a callHands-free Conversation Turning the Microphone On/OffIncoming Call Identification Using the PhonebookHandset Phonebook Storing a new itemEditing Phone number JoystickRight soft Storing an item in the Handset PhonebookDeleting KeyCategory number or Off Joystick Right Incoming callUP or Down . soft key Log group no To Hot Key Entering Characters Right soft keyPhonebook UsingMode Table CharacterFeature List OperationFeature Operation Paging Absent Changing the Initial Settings ProgrammingHandset setting menu layout Main Item Sub Item Description Setting Default LCD Contrast Cancel Base Memo alarm setting Flexible key edit Joystick Right softTo access sub-items, press Main Item Sub-ItemsOthers Turning the Walkie-Talkie mode onTurning the Walkie-Talkie mode off Walkie-TalkieJoystick Number Setting the Walkie-Talkie modeTalking in Walkie-Talkie mode Handset numberUsing the Belt Clip Wall MountingProblem Description and Solution TroubleshootingTroubleshooting Replacing the Battery Battery InformationLow Battery Warning Important InformationPlease replace with Panasonic battery only Installation Safety InstructionsSafety PlacementNoise For best performanceOperating Range RF Specifications DescriptionDisposal Information For business users in the European UnionPage PSQX3992ZA KK0306TT0 For Users in New Zealand only PTC200 General WarningPTC200 4.12 2 b Handset Instability

KX-TCA256 specifications

The Belkin KX-TCA256 is a versatile and advanced cordless telephone designed for users seeking a reliable communication solution with modern features. With a sleek and user-friendly design, this device caters to a variety of needs, making it an ideal choice for both home and office environments.

One of the standout features of the KX-TCA256 is its DECT technology, which ensures clear and uninterrupted audio quality during calls. DECT (Digital Enhanced Cordless Telecommunications) technology minimizes interference and provides a greater range than traditional cordless phones, enabling users to move freely within their space without compromising call quality.

Another significant characteristic of the KX-TCA256 is its impressive battery life. Equipped with a long-lasting rechargeable battery, this model can facilitate extended conversations without the constant need for recharging. Users can enjoy up to 8 hours of talk time and approximately 200 hours of standby time, ensuring that the phone remains operational through long meetings or extended family conversations.

The KX-TCA256 also boasts an ergonomic design that prioritizes comfort during use. The handset is lightweight, making it easy for users to hold during long calls. The intuitive interface features large buttons and an easy-to-read display, allowing users to access phone functions without frustration or strain.

Furthermore, this model incorporates a caller ID feature, which enables users to screen incoming calls easily. It can store a substantial number of contacts, providing quick access to frequently dialed numbers. The KX-TCA256 also supports multiple handsets, making it suitable for households or small businesses needing additional extensions without complicating their setup.

In terms of connectivity, the KX-TCA256 is compatible with various existing phone systems, thereby enhancing its versatility. Additionally, it includes essential features such as call waiting, speakerphone functionality, and speed dial, further enriching the user experience.

Overall, the Belkin KX-TCA256 embodies a modern cordless solution that meets the evolving demands of communication. Its combination of DECT technology, long battery life, ergonomic design, and user-friendly features make it an excellent addition to any telecommunication setup, ensuring efficient and enjoyable conversations for users of all ages.
Top Page Image Contents