Binatone CAPRICE 600 manual Distance of about 15 cms inches, EXIT/ON-OFF button to stop recording

Page 22

Answering Machine System continue...

To turn the 1 Answering machine ON or OFF

2

To switch between OGMs

Press and hold EXIT/ON-OFF button to turn ON the answering system.

ÖYou will hear, Answering machine ON.The display shows ANSWER ON and the MESSAGE light will light up.

Press and hold EXIT/ON-OFF button again to turn OFF the answering system.

ÖYou will hear, Answering machine OFF.The display shows ANSWER OFF and the MESSAGE light will turn off.

Note: Once turned OFF, you can still call the machine and it will answer after 15 rings.

Press and release EXIT/ON-OFF button to switch between OGM1 and OGM2.

ÖThe machine does not record messages with OGM2 (Announcement 2) selected; make sure OGM1 is selected if you want callers to leave messages.

To record a

You can record a memo directly into the

memo

machine. The length of the memo message

 

recording depends on the MESSAGE LENGTH

 

setting, see page 9.

 

The memo message will be played back

 

together with any messages from callers.

1

With the Handset on hook, press and hold

 

MEMO button until you hear a ‘beep’.

ÖThe display shows MEMO RECORDING and the message counter starts to count.

2

 

 

 

Start recording your memo. Speak directly

 

 

 

 

 

 

 

into the Base unit’s Microphone from a

 

 

 

 

distance of about 15 cms. (6 inches).

3

 

 

 

As soon as you have finished speaking, press

 

 

 

 

EXIT/ON-OFF button to stop recording.

 

 

 

 

 

 

ÖDay and time are automatically stamped at the end of the message.

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

22

Image 22
Contents Page Page Page Installation Locating the Base unitDesk Mount Desk/Wall mount installationWall Mount Desk/Wall mount installation continue Language Setting up the CapriceSET SET TimeSET Flash Setting up continueTime Press Menu button to confirm the Message Length setting LCD 1 Contrast Message LengthRings to Answer Remote Access Ringer volume To make a Call Telephone OperationTelephone operation continue Outgoing call record Phonebook Outgoing call record continueNew record Phonebook continueTo add a Other recordsOut To delete a Caller Display operationRecord from Viewing Caller Display operation continueCaller Display list Caller Press Dial button Record To delete a Caller Display Press Erase buttonAnswering Machine system OGMTo record Answering Machine System continuePress and hold OGM button until you hear a ‘beep.’ Distance of about 15 cms inches EXIT/ON-OFF button to stop recordingRepeat/Rewind To playback your message/sPlayback and Pause Skip/Fast ForwardEXIT/ON-OFF button Stop playbackDuring message playback, press Erase button Display automatically returns to standby mode To delete all 1 messages To go back to the defaultMake sure the machine is switched on Your Remote operationTo check From a RemoteRemote operation continue To delete all messages, press 0 twiceElectrical safety Operational notesTroubleshooting Troubleshooting continue If the fault persists … While the unit is under Guarantee Guarantee and serviceAfter the Guarantee has expired Technical details Declaration of conformityContents of this User Guide 0845 345