Avaya 4610SW installation instructions Connection Jacks Option A, LAN is 802.3af PoE Enabled

Avaya one-X™ Quick Edition

Telephone Quick Installation Guide

Installing a 4610SW/4621SW IP Telephone			Connection Jacks - Option A, LAN is 802.3af PoE Enabled
This document contains a summarized (four-step) installation procedure. For
detailed step-by-step procedures, including variants of this procedure, refer to the
Avaya one-X Quick Edition Telephone User Guide.
1	Unpack the equipment from the shipping box. The package should contain
	the following items:
	•	one telephone set (includes a telephone stand),
	•	one Category 5 (Cat5) modular line cord, and

•this quick installation guide.

	Power is typically supplied to the telephone by connecting the Cat5
	modular line cord to a 802.3af PoE-enabled Ethernet LAN. Option A on
	the facing page shows a wall jack, but you could connect the Cat5 modular
	line cord directly to a PoE-enabled Ethernet switch. If your Ethernet
	network does not provide 802.3af-compliant inline power, you must supply
	a PoE inline power supply (see Option B on next page). The last step in
	installing your telephone must be applying power.
	You may optionally connect the telephone between a computer and the
	Ethernet LAN—the telephone and the computer share the connection. In
	this case, you must supply a second Cat5 (or better) modular line cord to
	connect the telephone to the computer. For installation instructions, see
	‘‘To share the telephone LAN connection with a computer’’.
	Connect the first telephone to the LAN
2 1.		Plug one end of the supplied Cat5 modular line cord into the LAN
		port on the telephone and connect the other end to the Ethernet
		LAN.
	2. When you are prompted to create a site, press 1 on the dialpad.
	3. When you are prompted to enter a site name, press the keys on
		the dialpad to enter the site name, and then select the Next
		softkey. For example, to type “R”, press the dialpad key “7” three
		times. For more information about how to enter characters, see
		‘‘Entering Text and Special Characters’’.
4.		When you are prompted to change the default password (wait for	= optional
		the prompt), enter 54321, and then select the Next softkey.		facultatif
				optionale
5.		Follow the prompts to enter and confirm a different password. The		opcional
		password must contain at least five numbers in the 0 to 9 range.

6.When you are prompted for a name, use the keys on the dialpad to enter a user name for the telephone extension (for example, Smith, Pat), and then select the Save softkey.

March 2006 Revision: 1 16-600797 1