Operations of Caller ID, Option Function | BellSouth C500 specification

Operating Your Telephone

N G

Delete/Erase: (DEL BUTTON)

Pressing DEL in either the CID

or PhoneBook modes will remove the entry displayed. While pro- gramming a new number into the telephone, the DEL button will func- tion like a backspacing erase key. Pressing and holding the DEL button while in CID or PhoneBook mode will delete all the entries in the list. You will be prompted to confirm this action before the list is deleted.

Option Function:

This is a software function that lets the user to add a pre-programmed area code and/or long distance code onto a seven (7) or ten (10) digit CID number if necessary to dial. If a local area code (codes) and long distance code are pro- grammed into memory, then when the user presses ENTER/DIAL while reviewing a CID number, the phone will show the codes available to add, thus allowing the call to be dialed from memory.

If EASY mode has been activated during the setup process, EASY MODE will be displayed if you attempt to enter PhoneBook or Caller ID Memory.

OPERATIONS OF CALLER ID

This telephone automatically displays an incoming caller’s name and tele- phone along with the date and time of the call. It will record up to 70 calls of up to 11 digits and store the data into memory. The LED in the MODE button will illuminate RED to indicate a new call has been received.

IMPORTANT: You must subscribe to Caller ID Service from your local tele- phone company to utilize this feature.

The time and date as well as the total number of calls and the number of new calls will be displayed when the phone is on hook and not ringing. When the phone is first plugged in, the time and date will not be displayed. The clock is set by the network when a CID call is received. The clock cannot be reset manually. In event that the phone is unplugged or a power failure, you must wait for an incoming CID call to reset the clock.