BT 2100 manual Connecting to a switchboard, To confirm

5799 Relate 2100 (BT Server4) 26/4/04 9:57 am Page 54

BT Relate 2100 (BT SMS Server) – Edition 5 – 23.04.04 – 5799

54 General information

Connecting to a switchboard

This product is intended for use within the UK for connection to public telephone network and compatible switchboards, which support tone dialling and timed break recall. If in doubt please consult your service provider.

Switchboard external line access code

You may need to enter an access code (e.g. 9) in order to get an outside line. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code. You can do this as part of setting the access code.

Set access code and Pause

1. Press Menu scroll  to ACCESS CODE and press .

2. Press 

or



to set ACCESS CODE ON then press .

3. Enter the access number – up to 3 digits.

4. If required, press Pause and press . Display shows ACCESS CODE COMPLETED.

When the access code is switched On, it will be dialled automatically when dialling from the phonebook or one-touch buttons.

Access code On/Off

1. Press Menu scroll  to ACCESS CODE and press .

2. Press  or  to switch between ACCESS CODE ON / OFF then press

to confirm.