One-Touch and Two-Touch memories

Converse 325 ~ 3rd Edition ~ 17th January ~ 4116

To adjust the ringer volume

		There are 3 volume settings to
		choose from: HI, LOW or OFF.
		Use the ringer volume switch
		on the underside of your
	HI	Converse 325 to set the volume
	HI
	LOW	you want: HI, LOW or OFF.
	OFF	you want: HI, LOW or OFF.

		Note

When using the handset or a headset:

Press the Amplify button.

Press the VOL + or VOL - button to increase or decrease the volume.

One-Touch and Two-Touch memories

The call indicator light will flash regardless of the ringer setting chosen.

To adjust the ringer tone

You can store 20 telephone numbers in your Converse 325. 10 in the One-Touch memory and a further 10 in the Two-Touch memory.

Please note that stored numbers can be no longer than 21 digits.

USING

RINGER

The ringer tone can be set to High or Low.

Use the ringer tone switch on the underside of your Converse 325 to set the ringer tone you want: R1 for LOW or R2 for HIGH.

To store a One-Touch number

Use the label to keep a note of each One-Touch and Two-Touch numbers.

Note

To adjust the call volume

During a call, you can adjust the volume of a call.

When using Handsfree:

Press the VOL + or VOL - button to increase or decrease the volume.

One-Touch memory buttons 6-10 (the bottom 5 buttons) are pre-set with BT Select Services numbers (see ‘Using Select Services’). These can be overwritten if you wish by following the instructions below.

Press the Store button.