Converse 325 ~ 3rd Edition ~ 17th January ~ 4116
USING
When you replace the handset or press the Handsfree button to end the call, the display shows the final duration of the call for a few seconds before returning to the normal clock setting.
Using a headset
Note
Converse headsets (RJ11 jack) are available separately from BT shops or by calling 0870 240 5522.
Plug the headset into the socket marked HEADSET on the underside of the base.
To make a call, press the
Headset button.
Dial the phone number.
To end the call, press the
Headset button.
Last number redial
Your Converse 325 stores the last number called which enables quick and easy redialling. A redial number can be no longer than 32 digits.
To redial the last number called
Press the Handsfree button.
Press the Redial button.
The last number you called is redialled.
To repeat-dial a number
Note
This feature works in handset, handsfree and headset modes.
If the number you call is engaged, you can set your Converse 325 to dial a number repeatedly, saving you from having to continually press the Redial button.
When you hear the engaged tone, press the Redial button.
Replace the handset (or press the Handsfree or the Headset button – depending which mode you are in). The display will show BUSY.
Ten seconds after the handset is replaced, your Converse 325 will switch to ‘handsfree’ mode and the number is redialled.
8