BT Big Button 100 manual One-touch memory buttons

BT Big Button 100 – Issue 2 – Edition 1 – 10.02.06 – 6361

One-touch memory buttons 15

You can store up to three numbers using the one-touch buttons.

Each stored phone number can be up to 32 digits long.

Store a number in the one-touch memory

1.Remove the one-touch memory label as the store button is located underneath. Lift the handset or press Handsfree .

2.Press Store then press the one-touch button, you will hear a button press confirmation tone throughout the process.

3.Enter the number you want to store.

4.Press Store . You hear a longer confirmation beep. The number is stored.

Dial a number in the one-touch memory

1.Lift the handset or press Handsfree .

2.Press the one-touch button. The number stored for that button is dialled.

Edit a number in the one-touch memory

1.To change a one-touch dial number, simply store a new one. This will overwrite any existing stored number.

You can make a note of your one-touch numbers on the label above the store button. There is also an enlarged label at the back of this guide if you prefer.

You may hear an exchange announcement, during or after the storing sequence, suggesting that there has been an error, or that you should redial the number. This is normal and does not mean that the storing sequence is in error.