BT 425 manual Directory, Message Waiting indicator, To adjust your caller’s speech volume

BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528

Message Waiting indicator

When you have Voice Mail messages, the Message Waiting indicator flashes at regular intervals.

Note

This feature works with compatible switchboards only.

To adjust your caller’s speech volume

During a call, you can adjust the volume of your caller’s voice.

Press the Volume button.

The display shows VOLUME and the current volume level. Turn the Navigator Wheel clockwise to increase the volume or anti-clockwise to decrease it.

To adjust the ringer volume

Directory

USING

HI

LOW

OFF

RINGER

VOLUME

There are 3 volume settings to choose from: HI, LOW or OFF.

Use the ringer volume switch on the underside of your Converse 425 to set the volume you want: HI, LOW or OFF.

Note

You can store 75 names and numbers in the directory. Please note that stored numbers can be no longer than 21 digits.

You can use the Navigator Wheel – or the keypad – to enter names and numbers. The Navigator Wheel also lets you scroll quickly through stored names and numbers.

The call indicator light will flash regardless of the ringer setting chosen.

Directory entries are automatically stored in alphabetical order. Numbers without attached names are stored at the beginning of the list.

To adjust the ringer tone

Note

R1

R2

RINGER

The ringer tone can be set to High or Low.

Use the ringer tone switch on the underside of your Converse 425 to set the ringer tone you want: R1 for LOW or R2 for HIGH.

The directory is pre-programmed with some BT Calling Features numbers (see ‘Using BT Calling Features’ on page 15). These can be overwritten if you wish.

10