Installing
your
Converse 320
Situating your
Converse 320
Situate your Converse 320 close enough to a phone socket so that the cables will reach.
Install the batteries
The display on your Converse 320 is powered by 3 x AAA alkaline batteries (available separately).
This gives you Tone dialling and ensures the phone will work with all modern digital exchanges.
If your phone does not work, try setting the dialling mode to P.
If you are connecting to a switchboard, check with your switchboard operator or communications manager which dialling mode you need.
Do not stand it on carpets or other similar surfaces that generate fibres.
Your Converse 320 can be
Warning
Your Converse 320 is only designed to be operated in a normal office or domestic environment. It should not be used in bathrooms or near water.
Check your
telephone wall socket
1Make sure the phone is not plugged in to the phone socket. Open the battery compartment cover.
2Insert batteries as shown.
3Close the lid and replace the compartment cover.
Plug your Converse 320 into the phone socket
Set the time
1Press the Store button.
2Press the Clock button.
3Enter the current time using the
1 5 3 0 = 3.30pm.
4Press the Store button.
The time is set and displayed.
If you do not have a
Freefone 0800 800 150.
Check the
dialling mode
P
T
TB
MODE
1Set the dialling mode switch on the underside of your Converse 320.
It should be set to TB.
Your Converse 320 is now ready for making and receiving calls.