BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
To store a name and number in the directory
Press and hold the Directory button. Display shows STORE and EDIT.
STORE will be flashing.
Release the Directory button.
Press the ✔ button.
Display shows the number of entries stored in the directory, followed by ENTER NUMBER.
Note
If you try to add a new entry and the directory is full, the display shows MEMORY FULL.
To continue, follow steps shown in ‘To edit an entry in the directory’ or ‘To delete an entry in the directory’.
Enter the number you want
using the keypad. Alternatively, turn the Navigator Wheel until
the digit you want is displayed then press the ✔ button. Repeat this step until the full telephone number is entered.
Press and hold the ✔ button until the display shows
ENTER NAME.
Enter the letters you want
using the keypad. Alternatively, turn the Navigator Wheel to
display the letter required then press the ✔ button.
Press and hold the ✔ button until the display shows STORE and EDIT.
Note
You can stop during any set of steps and return to
standby by lifting the handset or pressing the Handsfree
button.
You can now enter another name and number.
To edit an entry in the directory
Press and hold the Directory button. Display shows STORE and EDIT.
Release the Directory button.
Turn the Navigator Wheel so that EDIT is flashing.
Press the ✔ button.
Turn the Navigator Wheel to display the entry you want to change.
Press the ✔ button. The cursor flashes under the first digit of the number. If you need to move the cursor, either press the
✔button or the Next button to go forward or the Clear button to delete a digit.
USING
11