If you want to see details of the entry before dialing the number on the Avanti 3020 telephone set, press the softkey on the right side of the appropriate name.
With the Avanti 3015D telephone set, press [TRANSFER]. The display shows the name for the entry, the number of the speed dial bin (e.g. 003) where the entry is stored, and the telephone number for the entry.
You can then press {DIAL} to dial the number, {UPDATE} to change the name or number for the entry, or {REMOVE} to delete the entry from the Phone Book.
To program your private Phone Book list
For each entry in your private Phone Book list, you enter both a name and a telephone number.
1.On the Avanti 3020, press {PHONE BOOK}.
On the Avanti 3015D, press the programmed button for the private Phone Book list, or press [FEATURE] and the feature access code for the private Phone Book list.
2.On the Avanti 3020, press {PRIVATE}.
3.On the Avanti 3020, press {ADD NEW}. On the Avanti 3015D, press {ADD}.
4.Enter the characters in the name (up to 16) by using the dialpad.
The table at the end of this section shows the dialpad equivalents of each character.
5.Press {NUMBER}.
6.Enter up to 16 digits for the telephone number.
7.Press [HOLD].
The previous display returns so that you can continue programming the next available speed dial bin.
8.After programming all the entries for the list: On the Avanti 3020, press {SAVE&EXIT} ; On the Avanti 3015D, press {EXIT}.
32 | Avanti 3020 and Avanti 3015D sets |