Ameriphone 50 manual Tone Slide Control Ringer Volume and Tone

Using Your XL-50 (Continued)

E

N G L

Note: In standard use, the amplifier turns off when you hang up the telephone. This is a useful feature if many people use the phone. If you want the amplifier to always remain on, slide the Volume Reset Override switch on the bottom of the phone to ON, as shown in Figure 11.

HOLD*PROG	0		#
		FLASH	REDIAL
TONE	AMPLIFY		VOL
LO	HI

Figure 12 - Tone Slide Control

Ringer Volume and Tone

I

S

H

- OFF

- ON

Volume

Reset

Override

Figure 11 - Volume Reset Override On/Off

Incoming Voice Tone

The XL-50 provides extra amplification in the sound frequency range you need to boost. To identify the range that best suits your needs, follow these steps:

1.When you hear a voice on the line, press the AMPLIFY button shown in Figure 9.

2.Adjust the TONE slide control in Figure 12 to suit your hearing.

1.You can adjust the RINGER VOLUME as high as 95+ decibels. The settings available are LO, MED and HI as shown in Figure 13.

RINGER	RING TONE	DIAL	AUDIO
Lo Med Hi	Lo Hi	T P	OUTPUT

Figure 13 - Ringer Volume & Pitch

2.The RING TONE has two pitch settings: LO and HI.

Hold
To put the line on hold, press the
HOLD button and return the handset
to its cradle. You will notice the
HOLD indicator light comes on.	8