IPF-2600 User’s Manual

4.1 Phone Book

1 Search

2 Add Entry

3．Speed Dial

4 Erase All

4.21．CallIncomingHistorycalls

2 Dialed numbers

3．Erase record

4.31.1PhoneAllCallForwardSetting

2．Busy

3．No Answer FWD

4．Ring Time Out FWD

．

Ⅳ. Configuration Settings

IPF-2600 User’s Manual/

The IPF-2600 IP phone supports multiple configuration settings. In this section, it mainly explains使用手冊 configuring using the phone keypad, and through the website. When the phone is connected properly, press the “Menu” button to enter the Menu mode to make changes on settings. Press the “Menu” button again to exit from the Menu. If no action is made after entering the Menu mode for more than 10 seconds, it will exit automatically.

Search the phone book entries, to make a call or edit the entries.

Add a new phone book entry.

Note:

If set IP code please add “-“ Symbol before the numbers

Set speed dial numbers Note:

1:M1-M4 cloud set PSTN speed dial number 2: the other only set IP speed dial number

Delete all phone entries

Enter to retrieve Incoming Calls history, press OK for options, select “Save” to save the changes or “Erase” to delete.

Enter to retrieve Dialed Calls history, press OK for options, select “Save” to save the changes or “Erase” to delete.

Enter to erase record of call history. Press “OK” for options, select between “Incoming” “Dialed” “All” to erase records.

Forward all calls – go、to Activation、 and select the options of “Enable” to turn on or “Disable” to turn off the function. Go to “Number” option to enter the phone number for call forwarding. Note:

PSTN and IP (SIP) support but PSTN number must add “-“ Symbol before the number.

Busy calls forward - go to Activation and select the options of “Enabled” to turn on or “Disable” to turn off the function. Go to “Number” option to enter the phone number for busy forwarding. Note:

Busy forward only support IP (SIP).

No answer call forward - go to Activation and select the options of “Enable” to turn on or “Disable” to turn off the function. Go to “Number” option to enter the phone number for no answer forwarding.

Note:

PSTN and IP (SIP) support but PSTN number must add “-“ Symbol before the number.

Ring time out call forwarding – enter the number of ring times before a call times out, then enter the phone number for call