Ameriphone XL-25s operating instructions Special Features, Programming the Memory Buttons

Page 11

Special Features

Programming the Memory Buttons

You can automatically dial twelve programmed telephone numbers using the memory buttons shown in Figure 16. Each button can be pro- grammed (or reprogrammed using the same procedure) for a phone number up to 16 digits long.

Figure 16 - Memory Buttons

To program a button, follow these steps:

Figure 17 - PROG Button

1.Lift the handset and press PROG as shown in Figure 17.

2.Enter the phone number on the keypad (Figure 18) just as you would dial it normally.

Figure 18 - Telephone Keypad

3.Press PROG (Figure 17) once again.

4.Press a memory button (Figure 16) to store this number on that button.

5.Immediately hang up the handset. Note: Any number previously stored at that button number will be overwritten.

6.To change a stored number, repeat the programming process starting with step 1.

9

Image 11
Contents DIALOGUEXLXL-25s Additional Safety Notes for Canadian Users Important Safety InstructionsContents Help from Ameriphone Warranty ServiceIntroducing the Dialogue XL-25s Sales ReceiptHold Features on the Dialogue XL-25sSetting the Dial Mode Setting up Your Dialogue XL-25sInstalling the Backup Batteries To install new batteryReversing the Hook Wall MountIncoming Voice Volume Using Your Dialogue XL-25sOutgoing Voice Volume Last Number Redial Ringer Volume and PitchHold Flash Button FlashProgramming the Memory Buttons Special FeaturesAudio Output Socket Direct Audio OutputSymptom Corrective Action Troubleshooting Chart FCC StatementWarranty Index Specifications
Related manuals
Manual 15 pages 5.98 Kb