Ameriphone XL-25s operating instructions Wall Mount, Reversing the Hook

Page 7

Setting up Your

Dialogue XL-25s (continued)

2.Plug the AC adapter into an electric outlet and into the telephone as shown in Figure 4.

3.Lift the handset and listen for a dial tone.

The phone is ready to use.

Wall Mount

1.Pull the handset hook out as shown in Figure 5 and reverse its position so that the hook points up and will hold the handset when you hang up.

Figure 5 - Reversing the Hook

2.Insert the tabs of the phone base into the slots in the lower position of the base as shown in Figure 6. Push the phone base in and down firmly until it snaps into place.

MANUAL

AUTO

Figure 6 - Phone Base for Wall Mounting

3.Plug in the short phone line cord and mount the phone as shown in Figure 7.

MANUAL

AUTO

Figure 7 - Wall mounting installation

4.See Desktop Use section and follow steps 1 and 2.

5

Image 7
Contents DIALOGUEXLXL-25s Additional Safety Notes for Canadian Users Important Safety InstructionsContents Help from Ameriphone Warranty ServiceIntroducing the Dialogue XL-25s Sales ReceiptHold Features on the Dialogue XL-25sSetting the Dial Mode Setting up Your Dialogue XL-25sInstalling the Backup Batteries To install new batteryReversing the Hook Wall MountOutgoing Voice Volume Using Your Dialogue XL-25sIncoming Voice Volume Hold Ringer Volume and PitchLast Number Redial Flash Button FlashProgramming the Memory Buttons Special FeaturesAudio Output Socket Direct Audio OutputSymptom Corrective Action Troubleshooting Chart FCC StatementWarranty Index Specifications
Related manuals
Manual 15 pages 5.98 Kb