Ameriphone Cellular Phone and Cordless Phone Connection, Chapter Setting UP Your Q90 TTY

CHAPTER 4 (CONTINUED)

D.Cellular Phone and Cordless Phone Connection

1.Connect one end of the Cell Cord into the jack in the back of the Q90 marked CELLULAR (2.5mm)

2.Connect the other end of the cord into the phone (as shown below).

CHAPTER 5

SETTING UP YOUR Q90 TTY

Your Q90 comes ready to use. However, for your convenience, we suggest you set up three basic features: Phone Directory for memory dialing, and MSG 1 and MSG 2 for user-programmed messages.

A.Adding Names and Numbers to the Phone Directory

Note: To work with your Q90, cell phones and cordless phones need a 2.5mm plug (commonly used for head- phones) or a compatible adapter. Among cell phones, analog service works best with the Q90. Digital cellular phone service is not recommended due to high message error rates.

1.Press Power to turn on the Q90.

2.Press F1 to enter dial mode.

3.Type the complete phone number sequence, (use space-

?

Shift

/

Power

An optional car cigarette lighter adapter, available from Ameriphone, can provide power to operate the Q90 while automatically charging the Q90 batteries.

	to car battery
	cigarette lighter
		optional
TO TO	HCO	12 VDC
LINE PHONE	SPEAKER	300 MA
		CELLULAR
		(2.5MM)
		to cell phone

Figure 6- Cell Phone Connection

	bar for pauses).
4.	Use	Œ	or Œ	to
	select the directory
	(1 through 24) where
	you wish to store
	the number.
5.	When finished, press					F7	F8	F9	F1
	F8	to enter the			MSG 2	Hi-SPEED	SAVE		HCO	TR
					^		&	*
	save mode.
					6		7	8
6.	The screen displays
	Edit Current Name Y/N?
7.	Press	Y	(Yes) and		%	^	&		*
	then type in a name				5	6	7		8
	for this number.				T	Y		U		I
8.	Press the		Return		G		H	J
	key when done.
9.	Repeat this process,
	starting at step 2 to
	add more numbers
	and names, or hold

8