Ameriphone DIALOGUE VCO Setting up Your Dialogue VCO, Installing the Backup Batteries

Setting up Your Dialogue VCO

There are three steps involved in set- ting up your Dialogue VCO.

•Insert four AA rechargeable NiCad batteries for back-up in case of AC power outage.

•Decide if you want the phone to sit on a desk or hang on the wall.

•Connect the telephone components.

Installing the Backup Batteries

If there is a power outage, the Dialogue VCO will operate for 4 - 8 hours with four AA rechargeable NiCad batteries (not included). If the phone is not in use, the batteries will stay charged for several months.

Insert batteries here

Press in

here to open

battery compart-

ment

MANUAL

AUTO

To Install New Batteries:

1.Slide open the battery compart-- ment cover on the bottom of the telephone (Figure 3).

2.Install four fresh AA recharge- able NiCad batteries. Be sure to observe battery polarity as imprinted on the base of the compartment.

Connecting for Desk or Wall Mount

Set the dial mode switch to T (tone) if you have touch tone service.

Set the switch to P (pulse) if you have rotary dialing.

Desktop Use:

1.Connect the telephone line cord and the handset cord to the telephone as shown in Figure 4.

2.Plug the AC adapter into an electric outlet and into the tele- phone as shown in Figure 4.

Figure 3 - Accessing the Batteries

Figure 4 - Connecting the Components

4