AT&T TR1909 Memory operation one-touch, To store a number in a one-touch memory location

Telephone memory

Memory operation (one-touch)

This telephone has 13 memory locations with three one-touch memory location keys (M1, M2, M3) and 10 two-touch memory location keys (0 through 9). Each location can hold a number up to 32 digits.

To store a number in a one-touch memory location

You can store up to three numbers in the one-touch memory locations (M1, M2 and M3).

To store a number in a one-touch memory location:

1. Lift the handset and press PROG.

2.Use the dial pad keys (0 through 9, and #)

to enter the number you want to store. Press PAUSE/REDIAL once to store a three-second pause in the dialing sequence,

twice for a six-second pause and so on.	10 : 03AM 12/01
- OR -	E1 Pro
Press PAUSE/REDIAL to store the last
	800-222-3111
number dialed.

3.Press a one-touch memory location (M1, M2 or M3) where you want the number to be stored.

NOTES:

•When you store a new number in the one-touch memory location, the old entry will be replaced and cannot be retrieved.

•If no action is taken for 10 seconds, the telephone returns to idle mode automatically without saving your selection.

To review a number in a one-touch memory location

To review a number in a one-touch memory location, lift the handset and hold down the switch hook on the handset, then press a one-touch key (M1, M2 or M3). The number stored in the one-touch memory location is displayed on the screen.

22