AT&T 518-600-016 manual Press Single

Page 269

These default dial plan numbers can be changed to a 3- digit number or some other 4-digit number. However, 3- digit and 4-digit numbers cannot be mixed.

Flexible numbering for the tie lines is not related to the flexible numbering of stations, lines, line pools, and groups. Therefore, any 1-or 2-digil numbers that you have assigned to stations, lines, line pools, or groups through flexible numbering can also be the beginning digits of a renumbered tie line dial plan. When people dial the longer tie line number, they will not be connected to the shorter renumbered station, line, line pool, or group.

Use completed Form 2C and the following procedures to renumber the inward dial plan.

To change the tie line dial plan number of one station, follow these steps.

1Enter administration mode by sliding the T/P switch to P.

2 Press Conference twice.

The administration menu appears.

3Press [More], [More], [More], [TieLines], [More], [More]. [More], [InDPin] .

The inward dial plan screen appears.

4Press [Single] .

5Press [Stations] .

6Dial the old station number or press the Auto Intercom.

button, them press [Enter] .

7Dial the new station number, then press [Enter] or press [Next] to change the next sequential station.

8Press Conference to return to the main administration menu, or leave administration mode by sliding the T/P switch to the center position.

3-60 Administering a New System

Image 269

Contents Merlin 1990 AT&T Issue All Rights Reserved January System Hardware System DescriptionWhats in This Manual System Overview System OverviewMerlin II system configuration System Overview Determined using system planning forms Size, type, and features of a Merlin II system areFor administration purposes Data featureSystem Overview A Merlin II system behind-switch operation System Overview System Overview System Overview System Overview Merlin II Attendant operation System Overview FM1 FM1 FM2 FM2 FM1 FM2 FM1 FM2 FM1 FM2 FM1 FM2 System Hardware Control unit components Control unit components System Hardware System Hardware System Hardware Module controls and indicators Module controls and indicators Green = test condition Amber = busy Red = standby mode System Hardware System Hardware A selection of analog voice terminals System Hardware Basic Operation of Voice Terminals System Hardware Alerter Accessories. Devices such as a horn, bell Accessories described hereAlert Adapter so that people working in noisy or CallsA selection of Merlin II system accessories System Hardware Basic Telephone and Modem Interface 2 BTMI-2 System Hardware System Hardware Theory of Operation System architecture Theory of Operation Theory of Operation Theory of Operation Analog to Digital Signal Processing PCM uses PAM as its starting point but goes further Mu-Law 150 … 108 Module slots Board signatures Time slots 256Music-on-Hold interface External paging interfaceSignaling 11 E&M signaling Tie Line Parameters Theory of Operation Theory of Operation 140 to 2400 ms increments of 10 ms 20 to 4800 ms increments of 20 ms Ms defaultLocal Mode Location Signaling ProtectedType Same Site Simplex System Or Inter Type BuildingMerlin II System Far EndOther Inter Protected Requires a Building Type Protection Standard Unit NetworkSystem Connectivity System ConnectivityMerlin II System Control unit Modem Pools Merlin II System Merlin II System control unit D8W cord Modem pool General Requirements for Modems System Connectivity MUSIC-ON-HOLD External Loudspeaker Paging 4PT 5PR System Connectivity Preinstallation Requirements InstallationInstalling the Control Unit Modifying the System Preinstallation Requirements Without dc voltages being affected Specification for an ac line voltage low of 99 VACMax. power use watts per power supply Max. current amperes per power supplyInstalled at the control unit location, additional Other splices, and should meet these specificationsMounting surface Hardware required System Grounding Requirements Merlin II System control unit Central Office Check the ac outlet for proper ground with a circuit tester CO Line Protector Surge Protectors Static Discharge Problems Solutions to Radio- Frequency Interference Problems System Grounding Requirements Typical Merlin II System Wiring Wiring the SystemMerlin II System control unit There are various types of jacks on the line and station Are for basic telephones only. In case of a powerModules -3.Each type of jack has a specific Function as followsLine and station module jacks Wiring the System 012 Outside Line Wiring Network interface adapters Wiring the System Testing the Outside Lines To number all the line jacks on the modules themselves Wiring the System Tie Line Module wiring Wiring the System Voice Terminal Wiring Pair modular jumper cords. These cords are for Connecting Voice Terminal Wiring Directly Wiring the System Wiring a Voice Terminal for TWO VOICE-PAIRS PFT O O O O O O R T R T R T Standard 4-PAIR Wiring Brand Rex BR866-JC Wiring the System Jack Field Wiring Wiring the System Constructing a Jack Field for Voice Terminal Wiring Wiring the System Topics Shop Wiring the System Wiring the System Wiring the System Wiring the System Labeling Jacks and Boxes Wiring the System Z601A Adapter 2A Adapter MountingZ610A Adapter 62400 Net Intf Adptr 267C AdapterBlack GND Yellow V2T Brown V2R Slate BR-W 48VGreen RED Black CO Line Wiring From Merlin Feature Module Basic Carrier AssemblyRequired components of a Merlin 10and are listed belowInstalling the Control Unit Mounting the Basic Carrier Mounting surface 18Backboard Installing the Control Unit 12 Mounting the basic carrier Installing the Control Unit When the carriers are completely engaged, tighten the screws Determining Unit Load Requirements Installing the Control Unit BIS-10 voice terminal 2x9 Button 1x8 Button Hfai 1X5 Digital 1X4Processor Module before installing Power Supply Module in the leftmost slotLeftmost slot must contain the Power Supply Module Install modules on the carrier from left to rightModule Installation Installing a Module Removing a Module Page Installing the Power Supply Module Installing a Frequency Generator Power Supply Module Installing the Control Unit Transformer Installing the Control Unit Installing the Control Unit Installing the Auxiliary Power Unit 19 Connecting the Auxiliary Power Unit to the control unit Installing the Control Unit Feature module Processor module Installing the Control Unit Bottom header AA Do not touch Modifying the 517B7 Processor Module for Square Key Line 400 with Dtmf Module Line 800 Module Installing a Tie Line Module If you are installing a Basic Telephone Module, you also Installing the Control Unit D R port Modular Z200A R d 144 LQ or NLQB1-DIR.1 1200DIP1-Open DIP2-Closed DIP2-Open DIP3-Open DIP4-Open Installing the Control Unit Installing the Control Unit Installing the Control Unit ADU Power to the System To Turn the Power Off Normal Operation Connecting the Voice Terminals Assembling the Voice Terminals Page Back to the center position Slide the T/P switch to the center positionHang up the handset Lift the handsetTouch one or more dial pad buttons Connecting the Power Failure Telephone Page Have that person call the number after you hang up Lift the handset on the Touch-Tone or rotary dial TelephonePick up the handset Using for the testTesting Intercom Calls Testing lntercom Ring Testing the System Planning Form for Feature Modules 1 Testing TIE Lines You hear ringing Number of the voice terminal at which you are waiting Completing the Installation27 Control unit covers Testing the System Installing the Top Cover 28 Installing the control unit top cover Testing the System Installing the Front Cover Front cover P t y module Modifying the System Adding a Voice Terminal Modifying the System Moving a Voice Terminal Modifying the System Adding Accessories Heavy machinery areas and quiet zones e.g Ringing in noisy or large working environment.31 a General Purpose Adapter Adding Accessories To the Other jack on the voice terminal Hands-Free Unit HFU is a speakerphone that allows33 a headset with Headset Adapter Adding Accessories Power Accessories Adding Accessories Basic Telephone and Modem Interface 34 a Basic telephone and Modem Interface Adding Accessories Power lines, Irob protectors are required. Two TII With power lines, and power currents induced by nearbyLeaves the building, and place the other where the cable Instructions on proper installation. See System35Grounding protection for Irob telephones Remote location by using the Off-Premises Telephone Available for Feature Module 1, Feature Module 2,Line Extender is not available. It is scheduled to beJack Voice Terminal Power Supply Unit Upgrading an Existing System Systems Feature Module 1 =32 Feature Module 2 = Release 3 =With a Display Console With a BIS-34D Console 34 Upgrading an Existing System Upgrading an ExistingSystem Upgrade Instructions FMI to FM2 Directly to the appropriate jacks on the line modules Considerations Dial Plan Printout AdministrationAdministering an Upgraded System Modules Features that can Affect Calling PatternsBasic Telephones Connected to Telephone Interface Devices Centralized ProgrammingAdministrator/Attendant Console 2The Administrator/Attendant Console Page Administration method provided in this section under Cannot be used to administer the MerlinAdministering Features a BIS-34 Console Administration codes on the dial pad, then pressing lineA BIS-34D Console Administrator/Attendant Console Assigning Intercom Numbers Display Console Shift Buttons Shift Display Console Station Shift ButtonsMust be on next to the shift button for the group that Contains that voice terminal’s intercom number. IfDisplay on the Display Console Administration Menu for Merlin II System, Release Page Voice terminal can’t be administered Current administration modeCurrent feature being administered InformationBefore Administering a System Both the Merlin II System Display Console Want to record the administration function labels in a Functions in administration mode, you should place aProgrammable features, be sure to assign Features from the attendant console usingThrough 32 for Feature Module 1 and assigned Administration port. Station port 01 intercomIdentifying numbers 801 through 856 for Feature Are the followingOn-Line Module Swap Port. Station port 19 is Inward Dial Plan Numbers. Four digits through Set system operating conditions Set options Before Administering a System Dial #201 Administering a New SystemPress Small for a small system or Large for a large System ARS For a behind switch system, press MoreDial number to designate system size = small = large As an attendant position, and this cannot be changed Dial #202Press Store Press MessagePress # This feature can be administered only from a MerlinAdministering a New System Press More, More, Print, DialPlan LNITIALIZING Below Go to of Block Renumbering or SingleStations or lines Press Lines, or Sations to select the screen forDial the first lowest-numbered new Flexible Number dial code Dial the new Flexible Number code Press Enter If your system is pooled, follow this procedure. If your Administering LinesAdministering a New System 5Press Lines, pools Press the line buttons until your selection is shown Press Adm PoolDial #302 Press line buttons for the selection you want Administering StationsPress the Auto Intercom button or dial the code for Station With a Display ConsolePress Adm Tel Press Adm TelPress Station, DialAcc Number of the station you are copying to Identifying Analog Voice Terminal Type Press Auto Intercom button until your selection is shown Dial #320To the center position Planning.Form for Feature Module 2. The form showsDial #210 Follow the appropriate procedure below to identify Setting OptionsPress the line button until your selection is shown Press Message Dial #204Dial #205 Following codesTerminal cannot have both features Administering DataPress either one of two adjacent Auto Intercom buttons Assign voice/data pairs by pressing the appropriateDial #211 Administering Tie Lines Setting tie line module DIP switches Administering a New System Port Options Switch Position Direction Line type outgoing Signal type300 ms Four digits, 4010 through 4097 Wink start Line, then press EnterPress More, More, More, TieLines, InType Repeat steps 4 and 5 for each tie line port Touch the tie line button to select the dial tone Press the tie line button to select the dialing mode. wantedRepeat steps 4 through 7 for each tie line port Press Drop remove the old setting SettingPress Drop to remove the old setting Switch to the center position Press Exit if you do not want to change the setting. o rPress Single Dial the first lowest numbered new dial code Press Enter Press BlockVoice Announcement Call Restrictions Administering an Upgraded SystemAdministering a Changed System Dial #299 From the administration menu, press System, MoreDial number to designate system size 0 = small = large Planning formsPress Small or Large for the system size wanted Enter administration mode by sliding the T/P switch to P Dial the appropriate number = square With a BIS-34D.ConsoleWith a Display Console Dial #203 Press StorePress More, Options, More, More, ModSwap Optional Features Features Compatibility Table A t u r e Quick Reference Administering Features from a Display Console Allowed Lists Press Dial table number O through Press D r o p Press Conference to Call Report To administer Copy from Use Backspace Disallowed Lists To create Dial the list number 0 through Group Call Distribution To assign lines Hold Disconnect Steady green light on = phone in group Night Service Enhanced To set up an To suspend Night Service with Time Set To get a One-Touch Call Handling To set system Drop Press Backspace or Drop to remove current entry Optional Features Administering Features from a BIS-34D Console Message ARS ARS To associate an Press the fixed button Conference, Transfer, or Drop Press Speaker Tel Press Conference To set up Disa outward Forced Account Code Entry Group Paging To assign phones to Press Message Night Service, Enhanced To assign phones to Touch Drop to remove entry Night Service, Enhanced To suspend Night Service Reminder Service Cancel Press Conference twice Transfer Return Administering Basic Telephones Administering Basic Telephones Basic Telephones Connected to Telephone Interface Devices Administering Basic Telephones Programming Voice Terminals Dial *346 for Delayed Ring Dial *36 for Delayed RingDial *37 for Immediate Ring Dial *347 for Immediate RingDial 37 for immediate ring Dial 36 for delayed ringCall Pickup Automatic Line Selection To program a pause, press Hold To program a stop, press Drop Programming Voice Terminals Programming Voice Terminals Testing Tie Lines TroubleshootingReaming the Control Unit Testing Outside Lines Basic Troubleshooting Procedures Components Basic Troubleshooting Procedures For Release General Operating Conditions Basic Troubleshooting Procedures Touch Conference twice On-Line Module SwapIntercom button Remove the controller station port designationTouch a programmable button Touching Intercom Ring Exit the procedure byTie Line Troubleshooting Tie Line Troubleshooting Tie Line Troubleshooting Tie Line Troubleshooting Tie Line Jack Pin Identification G n a l Pin No Try another tie line port, then retest the condition Select the next tie line for testing Testing Type 1 Compatible Tie Lines Tie Line Troubleshooting If you do not hear dial tone, go on to step Tie Line Troubleshooting Tie Line Troubleshooting 899 Readminister port 1 for Type 1 CompatibleAssign the tie lines to two stations, called station a Tie Line Troubleshooting Cross-connect field for Type 5 Simplex Tie Line Troubleshooting If the condition has not been corrected, go on to c Replace the Tie Line Module, then retest the condition Line Troubleshooting Procedures for Specific Symptoms Difficult to Place C a L LS Faulty Merlin II system Possible Cause Possible Solution To Investigate Further Caller Cant Hear Person Answering Hear the caller Symptom Calls waiting on hold are frequently disconnected Calls are CUT OFF or Dropped Symptom a voice terminal doesn‘t ring Intercom Ring Phone Constantly Rings Digital set with data stand Cause Possible Solution To Investigate Further Possible Cause Possible Solution To lnvestigate Further Faulty cable connection Symptom All voice terminals are without lights or dial tone Line Button Light Shows False Status BIS-34 Lights Dont O F F Symptom a feature programmed on a voice terminal doesnt work Symptom a module doesnt work properly in a slot Dirty Changed Recall Button Doesntwork C a L L S C O N N E C T S Line When Behind Switch System Looses ITS Memory DUE to a Power Failure On a BIS-34D Display Console, touch Message and dial #200 General TestsHardware Restart General Tests Product Listing Ordering Information Ordering InformationProduct Listing 5 4 7 6 4 5 Products Voice Terminals and Accessories Apparatus Desk Stands and Wall Mounts Button Label Sheets FM2 & R3 only CHM-CH-BT2-B-1 Basic telephone jacks. See Jacks IndexConsole Illus Grounding Systems, 3-36 Processor, installing feature module on, 2-73 Power supply units, auxiliary, 2-122- 2-123Printer Stations Wiring. See also Voice terminal wiring jack field, 2-33