AT&T 882 user manual Special Dialing Features

Directory

3

Special Dialing Features

Dialing Long Phone You can store numbers longer than 16 digits in different

Numberslines of an entry. Press Dial when the first part of the number is highlighted. Wait for dialing to stop. Highlight the other line and press Dial.

Entering a Dialing	You can program a pause/delay into a directory number
Delay	for use with certain banking and long-distance services,
	or to obtain an outside line when using a business
	telephone system. To insert a dialing delay in a phone
	number you are storing, press ÒPÓ or a ÒWÓ on the
	alpha key pad.
	Each time you press ÒPÓ, a delay of a few seconds
	occurs in the dialing sequence. ÒWÓ inserts a pause
	of 30 seconds. While the number is dialing, pressing
	Dial during the Wait will cause the Wait to end.
Storing a Temporary	If you have selected the pulse dialing mode, you may
Tone	store the TONE signal as part of the number. For
	example, you may store a dialing sequence that includes
	the phone number you will dial in pulse mode followed
	by the TONE signal and any additional number you
	will dial in tone mode.
	As you store the dialing sequence in the phone,
	press TONE, on the dial pad, at the appropriate point in
	the sequence.
Storing a Switchhook	You can use the switchhhook flash to activate custom-
Flash	calling services, such as call waiting or 3-way calling.
	You may store a switchhook flash as part of a custom-
	calling dialing sequence. Press FLASH , on the dial
	pad, at the appropriate point in the sequence. If you
	program a FLASH into a directory number and the
	phone doesnÕt wait long enough for dial tone before
	dialing, enter a pause after the FLASH . To enter a
	pause, press ÒPÓ on the alpha
	key pad.
Storing Custom Calling	You can use a directory entry for the codes that activate
Codes	a custom calling service. Follow the steps to ÒAdding
	a NameÓ on page 28. Instead of typing a phone number,
	enter the Custom Calling code.

32

AT&T 882 Manual