Dialing Restrictions and Permissions

SYSTEM RESET – PROGRAMMING SAVED

P+ >	R1.0	(p.	5-138)
PII >	R1.0	(p.	5-181)

IMPORTANT: Using this procedure disconnects any active calls but retains system settings. Use it only if the system fails to function correctly after a power failure or down period.

DIAL #728

OUTGOING CALL RESTRICTION

P+ > R1.0				(p. 5-109)
PII >	R1.0			(p. 5-144)
DIAL #401
DIAL	an extension number (10-33
	P+, 10–57 PII)
DIAL	1 = No Restriction ✔
	2 = Inside (intercom) Only
	3 = Local (intercom and
		local) Only
PRESS [ Next Item ] to program
		another	extension


TOLL CALL PREFIX
P+ > R1.0				(p. 5-143)
PII > R1.0				(p. 5-186)
DIAL #402


DIAL 1	= 0/1 plus Area Code and
	Number ✔
2	= Area Code and Number
	Only


SYSTEM PASSWORD
P+ > R1.0		(p.	5-137)
PII > R1.0		(p.	5-180)

DIAL #403

DIAL four digits to set the password

DISALLOWED PHONE NUMBER LISTS

P+ > R1.0	(p. 5-41)
PII > R1.0	(p. 5-71)

DIAL #404

DIAL a list number (1–4)

DIAL a list entry (01–10)

To add entry:

DIAL the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry PRESS [ Next Item ] to program another

list entry

To program another list:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new list number, and repeat above steps

DISALLOWED LIST ASIGNMENTS

P+ >	R1.0	(p.	5-40)
PII >	R1.0	(p.	5-70)

DIAL #405

DIAL an extension number (10-33 P+, 10–57 PII)

DIAL a list number (1–4) DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to assign another list

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension number, and repeat above steps

EMERGENCY PHONE NUMBER LIST

P+ >	R1.0	(p. 5-50)
PII >	R1.0	(p. 5-82)

DIAL #406

DIAL a list entry (01–10)

To add entry:

DIAL the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

ALLOWED PHONE NUMBER LISTS

P+ >	R1.0	(p.	5-9)
PII >	R1.0	(p.	5-9)

DIAL #407

DIAL a list number (1–4)

DIAL a list entry (01–10)

To add entry:

DIAL the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

To program another list:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new list number, and repeat above steps

ALLOWED LIST ASSIGNMENTS

P+ >	R1.0	(p. 5-8)
PII >	R1.0	(p. 5-80)
DIAL #408

DIAL an extension number (10-33 P+, 10-57 PII)

DIAL a list number (1–4) DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to assign another list

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension number, and repeat above steps

FORCED ACCOUNT CODE LIST

P+ > R3.1		(p. 5-60)
PII > R3.1		(p. 5-92)
DIAL	#409
DIAL	a list entry	(01–99)

To add entry:

DIAL the account code (up to

6digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

CLEAR – SYSTEM RESET – PROGRAMMING NOT SAVED

P+ > R1.0

PII > R1.0

IMPORTANT: Using this procedure disconnects any active calls and ERASES all system and station programming back to the factory settings.

DIAL #989 or 25327

System Speed Dial Numbers

P+ R1.0–R3.1:

60 SS w/2 Digit Codes 20-79, > R4.0 100 SS w/3 Digit Codes 600-699

(p. 5-139)

PII R1.0–R3.1:

60 SS w/2 Digit Codes 20-79, > R4.0 100 SS w/3 Digit Codes 600-699

(p. 5-182)

To program a number:

l To remove a number:

PRESS [ Feature ] [ 0 ] [ 0 ] to enter programming mode

l PRESS [ Feature ] [

] [

] to enter programming mode

PRESS [ Feature ]

DIAL

a three-digit code (600–699)

PRESS [ Feature ]

l DIAL the System Speed Dial number’s code (600–699)

DIAL

the telephone number—up to 28 digits (20 prior to R4.0) including

l PRESS [

Mic

]

special characters (see page 5-127 P+, 5-164 PII) To “mark” it (to

override restrictions), dial [ ★ ] before the telephone number

To remove another number, repeat

l PRESS [ Feature ] [ 0 ] [ 0 ] to exit programming mode

To program another number, or to change a number, repeat

PRESS [ Feature ] [

] [

] to exit programming mode

✔

= Factory setting

= Button with lights required

= Indicates release when feature was first added to system e.g. > R3.0	P+/PII R4.1

MG9150J specifications

The AT&T MG9150J is a robust broadband gateway designed to meet the growing connectivity needs of modern homes and small businesses. This device combines advanced technologies and features to deliver seamless internet access, supporting multiple devices with high-speed connectivity.

One of the standout features of the MG9150J is its compatibility with the latest Wi-Fi 6 (802.11ax) standard. Wi-Fi 6 enhances overall network performance by allowing more devices to connect simultaneously without degradation in speed. This is particularly beneficial in households with multiple smart devices, including smartphones, tablets, laptops, and IoT devices. Additionally, Wi-Fi 6 supports improved efficiency through features like MU-MIMO and OFDMA, enabling better multi-user performance and reduced latency.

The AT&T MG9150J is equipped with dual-band capabilities, operating on both 2.4 GHz and 5 GHz frequency bands. This flexibility allows users to connect their devices based on their specific needs. The 2.4 GHz band provides longer range and better penetration through walls, while the 5 GHz band offers higher speeds and is less prone to interference, making it ideal for activities that require a stable and fast connection, such as gaming and streaming.

Another significant characteristic of the MG9150J is its integrated security features. Equipped with advanced wireless security protocols, the device helps protect user data and maintain privacy. Features such as WPA3 encryption enhance protection against unauthorized access, ensuring that networks remain secure from potential threats.

The gateway also supports advanced Quality of Service (QoS) settings, which allow users to prioritize bandwidth to specific applications or devices. This feature is particularly useful for households where multiple users engage in bandwidth-intensive activities simultaneously, such as video conferencing or online gaming.

Additionally, the AT&T MG9150J is designed with user-friendly setup and management options. It typically includes a mobile app that enables users to monitor their network, manage connected devices, and adjust settings remotely. This convenience enhances the overall user experience by making network management easier and more accessible.

In conclusion, the AT&T MG9150J stands out as a comprehensive gateway solution, combining cutting-edge technologies, innovative features, and user-centric design. With its support for Wi-Fi 6, dual-band capabilities, robust security measures, and enhanced management options, it meets the demands of today’s digital lifestyle, providing reliable and high-speed internet access for all users.

SYSTEM RESET – PROGRAMMING SAVED