8. Touch 
to confirm and save record.
NOTE: A number can be saved without entering a name. When
requested to enter the name, press 
key and move to number entry.
To dial from Phonebook
1.Touch 
.
2.Touch 
or 
to select the record you wish to dial.
3.Touch 
to dial.
To program your voice mail access number:
1.Press the 
key. When the 
key is pressed, and there is no voice mail number programmed, the unit will momentarily display ‘NO VMAIL SET’ and will then display VMAIL NUMBER to prompt you to enter your voice mail number into the phonebook record.
2.Once you have stored your voice mail number, press the 
key to automatically dial your voice mail service to access your messages.
3.If you would like to automatically enter your PIN code, press the 
key to create a pause then enter your PIN. 'P' will appear on the screen to indicate where the pause will occur. More than one pause entry may be necessary. (For additional information on storing numbers in the Phonebook, see the section in the
PHONEBOOK - STORING NUMBERS.)
4.Touch 
to confirm.
To switch to a Call Waiting call:
When you hear a call waiting tone:
1.Touch 
to answer the incoming call and place your existing call onhold.
2.Touch 
to toggle between calls.
EN
7