Figure 2, Top View of Charging Base, shows the following features (the list begins with the Talk indicator and continues clockwise around the drawing of the charging base):
Talk Indicator
Charge Indicator
Message Indicator
Ringer Volume Controls
Base Extension Label
Base Ringer
Handset Hook
Battery Charging Contacts
Power Cord Jack
(not shown in the figure)
This indicator is lit when the handset is
This indicator is lit when the battery is charging and the handset is properly placed on the base.
This indicator is lit when you have a message. (MSG also appears on handset display.)
For adjusting the base’s ringing volume. Press the left button to decrease the ringer volume; press the right button to increase the ringer volume.
Note: When the handset is on the base, only the base rings. Both ring when the handset is out of the base.
For writing the extension number (using a pencil or ballpoint pen only). Do NOT use a
This is the ringer located in the base.
For hanging up the handset in the base.
For charging the handset when contact is made with the charging base.
For connecting the power cord to your telephone. This cord is then plugged into a wall outlet. This jack is located on the other side of the base.
5