AT&T MDC 9000 manual Consult for G1 & G3, Intercom

Consult (for G1 & G3)

Note: The Consult feature can be used only if your telephone is connected to a DEFINITY G1 or G3 or System 75.

To talk privately with a	1	Press	Trans	[dial tone]
coworker after answering		Call is put on hold
a redirected call
	2	Press		[priority ring to coworker]
			Consult

or

dial coworker’s extension

Note: You can privately discuss call; if coworker is not available, press the line button with the winking display to reconnect to call.

3 Press Trans or

press Conf

again to send call to coworker

to make it a 3-party call

Intercom

To make a call to your predetermined Automatic Intercom partner

1Pick up handset

2Press On/Off

3	Press an available line button	[dial tone]
4	Press Icom Auto xx	[ringback tone]
	Special intercom ring is sent

To dial a call to a	1	Press Icom Auto xx
member of your Dial	2	Dial group member’s 1- or 2-digit code
Intercom group
		[ringback tone]

Special intercom ring is sent

23