AT&T 146 installation manual Telephone System Incoming Line Jack

Page 9

Telephone System

PagePac 6 can be placed on a desk or shelf, or wall-mounted using the keyhole slots in the bottom of the unit. After selecting a convenient location:

1.Connect the Trunk Adapter modular cord to the PagePac 6 PAGE jack.

2.Connect the Trunk Adapter power cord to the PagePac 6 POWER OUT jack.

3.Connect the Trunk Adapter jack J2 to the telephone system page jack with a standard modular cord.

4.Plug the PagePac 6 power cord into a standard AC wall outlet, or use an extension cord if necessary.

Image 9

Contents AT&T Ordering Information Side AccessFeatures Introduction toPagePac 6 Voice Paging System For telephone systems equipped with a InstallationLine Protector Model Optional PagePac Trunk Adapter that connectsInstallation Procedure Connecting Pagepac 6 to a page PortConnections to a Page Jack Required MaterialsConnections to a Line Jack Using the PagePac Port Saver Connecting Pagepac Using the Pagepac 6 Port SaverWall Mounting Arrangements for Port Saver & PagePac Connecting Pagepac Using a Pagepac Trunk Adapter Connections to a Line Jack Using the PagePac Trunk AdapterRequired Material Telephone System Incoming Line Jack Paging Area Connecting Speakers to PagepacSpeaker Type AT&T Order no Standard Indoor Speakers Horn SpeakersFigure a Music Source Connections to PagePac Connecting a Music SOURCE* to PagepacInstallation Procedure Operation PagingAnswering Calls While Paging Placing a Call Using Last Number RedialRedial Without a Pause Button To RedialTroubleshooting Procedures Adjustng page and Music VolumeEquipment Required If Connected Using a Trunk Adapter Problem Corrective ActionTrouble Analysis Table If Connected to Page PortIf Connected Using PagePac 6 Port Saver Page Limited Warranty and Limitation of Liability Warranty InformationFCC Part FCC Regulations Pertaining to this EquipmentRadio Frequency Interference Connection and Use with Nationwide Telphone NetworkCopyright 1988 AT&T 999-500-246