Installation Procedure

1.Connect MusicMate (Figure A), or alternate source (Figure B), to the PagePac 6 MUSIC IN terminals.

When using MusicMate (Figure A), connect the MusicMate D.C. power cord to the PagePac 6 POWER jack. A phono-jack-to-screw-terminals adapter is provided with the MusicMate. Use it to connect the MusicMate output cord to the PagePac 6 MUSIC IN terminals.

2.Turn on the music source (the output should be heard over the paging speakers).

3.Select a station and set the volume control, as follows:

—If using MusicMate, follow the instructions supplied with the unit. Then use the MUSIC VOL control on the PagePac 6 to adjust the volume, as described in the OPERATION Section of this manual, Page 18.

—Set the volume control at mid-range and then use the MUSIC VOL control on the PagePac 6 to adjust the volume, as described in the OPERATION Section of this manual. Page 18.

NOTE: If, during a page or when using talkback, you hear music in the speakers or phone, reverse the position of the wires on the MUSIC IN terminals.

NOTE: Those who use paging systems to rebroadcast copyrighted music are required to obtain licenses from and pay fees to copyright owners. This usually involves obtaining licenses and paying fees to either ASCAP and/or BMI (American Society of Composers, Artists and Producers, Broadcast Music Inc.). It is the user’s obligation to obtain any license required and pay any fees.