MEMORY DIALING
Memory Features
This telephone can store up to 13 different phone numbers, each up to 21 digits long. Numbers will remain stored in memory unless you erase or change them by entering other numbers.
NOTE: Numbers programmed into a memory location might not be retained if the telephone has been unplugged from the line jack for a half hour or more.
Directory Card: Remove the directory card.Write your telephone number in the space provided.Also write the telephone numbers (or names) that you want to store in each memory location. Reinstall the card and clear plastic cover.
7
MEMORY DIALING
One-Touch Dialing
Three numbers can be stored in
symbol (
, 
or 
).
To program numbers into memory
1 Lift the handset.
2 Press
.
3 Press the
4Enter telephone number. You will hear a click when each button is pressed.
5Press 
.
6Hang up after the number is entered correctly.
7Repeat Steps
To dial
1Listen for dial tone.
2Press the
(
, 
or 
).
8
MEMORY DIALING
Speed Dialing
Ten telephone numbers can be stored in standard
To program numbers into memory
1Lift the handset.
2Press 
.
3Press M.
4Enter a digit
5Enter the telephone number. You will hear a click when each button is pressed.
6Press 
.
7Hang up after the number is entered correctly.
8Repeat Steps
To dial
1Listen for dial tone.
2Press M.
3Press memory location
Memory Erase
To erase any number from memory, you can enter another number in the same location.
9
IN CASE OF DIFFICULTY
If you have difficulty operating this phone, try the suggestions below. For Customer Service, visit our
website at www.telephones.att.com or call
1 800
To purchase accessories or replacement parts contact Customer Service. Visit our website at
www.telephones.att.com or call 1 800
OPERATION
PROBLEM | SOLUTION |
No Dial Tone | • Make sure all plugs are |
| connected properly. |
| Inspect the line cord |
| connections at the |
| modular wall jack and |
| at the telephone.Also |
| inspect the coiled |
| handset cord connections |
| at both ends. |
| • Unplug the telephone |
| and connect it to |
| another modular wall |
| jack. If it still does not |
| work, try another |
| telephone; if neither |
| telephone works, the |
| problem is not in your |
| telephone.The trouble |
| may be caused by local |
| telephone company |
| lines, central office |
| equipment, or the |
| wiring in your home. |
|
|
| 10 |
IN CASE OF DIFFICULTY
OPERATION
PROBLEM | SOLUTION |
Calls Cannot Be | This product comes set |
Dialed, Or Are | in the tone (TT) mode. |
Dialed Slowly | Make sure you choose the |
| correct dialing method |
| (TT or DP) for the DIAL |
| switch. |
| Touch tone dialing will not |
| work if you have |
| dial pulse service. |
| If you have tone dialing |
| service, you can use either |
| tone or dial pulse mode. |
| If you set the switch to |
| TT, numbers are dialed |
| much more quickly. |
|
|
PROBLEM | SOLUTION |
|
You Can Hear | • The Mute feature might | |
the Other Party, | be activated. |
|
but Other Party | • Try pressing | . |
Can’t Hear You | • If this doesn’t work, try | |
| pressing | again. |
•If you program a number into memory while on a call, the other party will be unable to hear you.
11
IN CASE OF DIFFICULTY
OPERATION
PROBLEM | SOLUTION |
Telephone Does | • Make sure the RINGER |
Not Ring | volume switch is not |
| set to OFF. |
| • You may have |
| inadvertently turned |
| off the ringer. Press |
| , #, 6, |
| . |
| • If there are several other |
| phones on the same line, |
| try disconnecting some |
| of the other telephones. |
| Having too many |
| telephones can also |
| create problems such |
| as low ringer volume |
| or impaired quality |
| during calls. |
|
|
12 | 13 |