A N S W E R I N G S Y S T E M O P E R A T I O N
Recording a Memo
You can record a memo to be stored as an incoming message. The memo can be up to 3 minutes long, and will be played back with other messages.
1Press and release M. After the beep, speak toward the microphone.
2To stop recording, press S.
When Memory is Full
The system can record approximately 12 minutes of messages, including your announcement, for up to a total of 99 messages. When memory is full, or 99 messages have been recorded, the Message Window flashes F. Delete messages to make room for new ones.
When memory is full, the system answers calls after 10 rings, and sounds 2 beeps instead of playing your announcement.
You can change the Remote Access Code to any
1Press and release g. The Message Window displays CH.
2Press and release c. The system announces “First digit.”
3Press /or ?to change the digit.
4When the Message Window displays the desired first digit, press and release c. The system announces “Second digit.”
5Press /or ?to change the digit.
6When the Message Window displays the desired second digit, press and release c. The system announces “Third digit.”
7Press /or ?to change the digit.
8When the Message Window displays the desired third digit, press and release c. The system announces the new Remote Access Code.
Remote Access Code
You can use many features of this answering system remotely from a touch tone phone. Most features can be accessed only after you enter a Remote Access Code, preset to 500. You can view the Remote Access Code by tapping c.