Xingtel Xiamen Electronics XL-2031IDW Operation about the Stored Numbers, Function Operations

OPERATION ABOUT THE STORED NUMBERS

Two -touch memory a. To store number

You can store number to the two-touch memory in either on-hook or off-hook state. Press the store button and the LCD shows - - >. Then enter the telephone number you want to store. Press the store button once again and the LCD shows - - >?. Enter desired location number ( 0~ 9 ) and the LCD shows SAVE OK .

b. To dial a number from the memory

Lift the handset or press the button. Press the auto button followed by a corresponding location number button(0~9), the matching stored number will be dialled out.

C. To review the number in two-touch memory

In the state of on-hook, press and hold the location number(0~9) or press the auto button + the location button, the matching stored number will show on the LCD.

One -touch memory

a. To store number (You can store number to the one-touch memory in the following 3 ways):

1.In the on-hook or off-hook state, press the store button and the LCD shows - - >. Then enter the telephone number you want to store. Press the store button once again and the LCD shows - - >? Press the desired location button (m1~m6) and the LCD shows SAVE OK .

2.First enter the number you want to store then press and hold the (m1~m6) button until the LCD shows SAVE OK.

3.You can copy the CID or Last 10 dialled or phone book number to m1~m6.

When the number shows on the LCD, press and hold the location button(m1~m6) until the LCD shows SAVE OK, now the number has been stored at the right location in the one-touch memory.

FUNCTION OPERATIONS

This unit contains the following special function, press del button twice to enter the setting mode and press s or t button to select one. The setting sequence is PHONE BOOK - SET RING - BACK LIGHT - LCD

CONTRAST - SET TIME- SET LANGUAGE- SET AREA& LDS - SET FLASH- HOUR

FORMAT- DATE FORMAT. Press the dial button to confirm and press del to exit.

1. PHONE BOOK

a. To add number and name to the phone books

Key	Characters		Key	Characters
1	1 .	-" ( )	6	M N O m n o 6 O O N
2	A B C a b c 2 A A E		7	P Q R S p q r s 7
3	D E F d e f 3		8	T U V t u v 8 U
4	G H I g h I 4		9	W X Y Z w x y z 9
5	J K L j k l 5		0	0 + & @ / $ %

1.Press dial button to select the phonebook menu and the LCD will show: REVIEW. Press s or t to select the ADD menu. Press dial button to enter the function of adding name and number. (You can enter it directly by pressing and holding the phone book button.)

2.Enter the telephone number by keypad. Press del button for deleting the previous digit. The maximum number of digits to be entered is 20, if the number exceeds 20, the LCD will show TOO LONG and the exceeding digits will not be stored.

3.After finishing the number setting, press and hold dial button (or press phone book button once) to enter the name setting, press the appropriate keypad to get the following characters, If the next character is on the same button as the previous one, you will first need to press dial button before the entering, press del button to delete the previous digit.

13 6