ONE Touch Memory, Outgoing Call Record

9.6To switch between the handset and the speakerphone

tDuring a phone conversation through the handset press the speakerphone button to speak hands-free.

>The Speakerphone icon on the display and the speakerphone light next to the button will turn on, but conversation remains through the handset until the handset is replaced on the base unit cradle. While in speakerphone mode, lift the handset to enable a private conversation.

9.7To mute the mouthpiece or microphone

During a call, you can mute the microphone or the mouthpiece so that the person on the other end cannot hear you.

tPress the mute button .

>While the microphone is muted, “MUTE” will ﬂash in the lower right corner of the display, and the mute icon will also ﬂash.

tPress the mute button again to get back to the call.

9.8LCD screen backlight

The display backlight will turn on for 15 seconds every time any button is pressed or when ringing is received.

10 ONE TOUCH MEMORY

10.1Store (M1, M2, M3) memory

tIn standby mode, key in the telephone number you wish to store, up to a maximum of 24 digits. tPress the menu button .

>The display shows “ENTER LOCATION”.

tPress the M1, M2, or M3 button to store the number in the selected memory.

10.2Dial out stored number memory

tPress the M1, M2, or M3 button.

>The programmed memory number will be displayed. tLift the handset or press the speakerphone button .

>The phone automatically redials the number using handset or speakerphone mode selected.

11 OUTGOING CALL RECORD

11.1Last number redial

tLift the handset or press the speakerphone button . tPress the redial button .

>The phone automatically redials the last number you called.

Note:

tThis will not work straight after a mains power disconnection, but „Making a call from the outgoing call record“ below will still be ok.

tDialled numbers are only saved in the last number redial memory if the number has started dialling out.