7
8SETTING UP YOUR TELEPHONE
Note:
The system will time out if you leave more than 10 seconds between key presses.
8.1Set language
With the phone in standby mode; tPress the menu button 
.
>The display shows “OPTIONS MENU“.
tPress the up button 
to go to the language setting. >The display shows “SET LANGUAGE“
tPress the OK button 
to confirm.
tPress the up 
or down 
button to select “ENGLISH” (default), “FRANCAIS” or “DEUTSCH”.
tPress the OK button 
to confirm.
tContinue with programming, or press the stop button 
to return to standby mode.
8.2Set time / date
Note:
If you subscribe to the caller display service the time and date will be set automatically, but the year may still need to be adjusted to ensure the answering machine time stamp gives the correct day.
tPress the menu button 
.
>The display shows “OPTIONS MENU“.
tPress the up 
or down 
button until de display shows “SET TIME/DATE”.
tPress the OK button 
to confirm. >The “year“ will be blinking.
tPress the up 
or down 
button to set the year.
tPress the OK button 
to confirm. >The “month” will be blinking.
tPress the up 
or down 
button to set the month.
tPress the OK button 
to confirm. >The “date” will be blinking.
tPress the up 
or down 
button to set the date.
tPress the OK button 
to confirm. >The “hour” will be blinking.
tPress the up 
or down 
button to set the hour. >When setting the ‘hour it is in 24 hour mode only.
tPress the OK button 
to confirm. >The “minutes” will be blinking.
tPress the up 
or down 
button to set the minutes.
tPress the OK button 
to confirm time and date setting.
tContinue with programming, or press the stop button 
to return to standby mode.
8.3Set flash time
You may need the recall function if your phone is connected to a PBX or if you use BT calling features. Flash is another name for the recall button Rand the normal UK requirement is for 100 ms, but some PBX may need a longer time, in which case you can change the setting from the options menu.
tPress the menu button 
.
>The display shows “OPTIONS MENU“.
tPress the up 
or down 
button until de display shows “SET FLASH TIME”.
tPress the OK button 
to confirm.
tPress the up or down button to select “100MS” (default), “300MS”, “600MS” or “1000MS”.