BEEP
4. USING THE MEMORIES
NOTE: When programming your TEMPORIS communicates with you using 
BEEP
.
1 Beep : Whilst programming, each key pressed is validated by 1 
BEEP
.
2 Beeps : Indicate that your programming is correct.
3 Beeps : Something is wrong in your programming; Restart from the beginning.
Your telephone set can store 10 numbers of up to 24 digits.
4.1 PROGRAMMING THE MEMORIES
Programming without calling
lGo off hook.
lPress the Programming key.
lEnter the number.
lPress one of the ten memory keys.
Programming whilst calling
lGo off hook.
lEnter the number.
l Press the Programming key whether you are in conversation or not.
lPress one of the ten memory keys.
4.2DIALLING FROM A MEMORY l Go off hook.
l Press one of the ten memories keys. The loaded number is dialled automatically.
4.3ERASING A MEMORY
lGo off hook.
l Press the Programming key twice.
lPress the key corresponding to the memory to be erased.
5. CHOOSING AND ADJUSTING THE RINGER
You can choose and adjust one of the four melodies available when your telephone is ringing, or at any time after entering the programming mode.
5.1 WHEN YOUR TELEPHONE IS RINGING
Modification of the ringer can be carried out during a ringing phase. l Press one of the keys 1, 2, 3 or 4 to change the melody.
lTo reduce or increase ringing volume, press 
or 
on TEMPORIS 22 or
press | or | on TEMPORIS 12. |
Your modifications are memorized, you can answer the call.
5.2 WHEN IN PROGRAMMING MODE
To access the programming mode:
l Press and hold keys 1 and 3 simultaneously. l Pick up the handset.
l Release the keys.
l Access to programming mode is confirmed by 1 beep.