BEEP
BEEP
6.4 IF YOU FORGOT THE PASSWORD
Access the programming mode again and then:
lPress the Programming key followed by 0.
lPress the * key.
l2 beeps are generated.
lGo on hook.
FThis last operation erases the WHOLE programming including memories.
The password is 0000 again.
7.CONFIGURATION FOR PROFESSIONAL USE
If your TEMPORIS is connected directly to the public network, do not pay attention to this chapter.
7.1 ACCESSING THE PROGRAMMING MODE
Your are offered 3 operations. For each of them, access the programming mode again.
lPress keys 1 and 3 simultaneously.
lGo off hook.
lRelease the keys.
7.2 TYPE OF DIALLING
lPress the programming key followed by 2.
For pulse dialling
lPress the 
key (or 
key)
lGo on hook.
For tone dialling
lPress the 
key (or 
key).
lGo on hook.
7.3 FLASH DURATION (R)
Access the programming mode again and then:
lPress the Programming key followed by 3.
lPress : 1 for a 80 ms flash,
2 for a 100 ms flash,
3 for a 180 ms flash,
4 for a 250 ms flash,
5 for a 300 ms flash,
6 for a 600 ms flash.
lGo on hook.